True Bypass Loop - Or Jamman mod?

[Laimon]

Hey guys,

I own a JamMan stereo, which is the only non-true bypass pedal in my chain and that noticeably harshes my tone when I pass through it.
So I wanted to either mod it (but I didn't find anything about it, and in fact I'm not really confident it can be done at all), or use a true bypass loop pedal (as small as possible, don't have much room left in my board).
In the second case, which is the smallest you know?
Thanks

Simone

[XISTH]

Good question, I'd like to do the same.

[Bufferz]

I would contact JHS about the mod - they do not say "no" or "can't be done." often.

And this is as small as the loopers get because you have to be able to fit a footswitch and 4 jacks:

http://i42.tinypic.com/2czpx4x.jpg

(the pictures looper is loop-master, however many companies offer these)

[Laimon]

Well, they seem to do good jobs, but they are in the US, while I am in Europe...sending a pedal over there to get it modded and sent it back again seems quite an overkill ;-)

[BAN]

And this is as small as the loopers get because you have to be able to fit a footswitch and 4 jacks:

http://i42.tinypic.com/2czpx4x.jpg

(the pictures looper is loop-master, however many companies offer these)

When I had a JamMan, I had it in one of these and it worked great and was unobtrusive.

[Bufferz]

Ya, if I had known you in the UK I wouldn't have suggested JHS. Looper will likley be your best option anyways.