AxeGrinder
08-27-2008, 09:37 PM
Hello every one. this is my first post here and though Ive been playing guitar for the better part of 10 yrs (off and on) I have never really dug too deep into anything outside of using a head to power 1 or 2 cabinets.
My question is this, whats going to be the best way to use the preamp in my head with two seperate power amps. I have recently built a cabinet with 4 G12T-100 speakers in it. I have two Peavey Classic Series 50/50 Tube power amps coming to me and I was hoping to use them in mono (100 watts) both on this same cab where each power amp powers 2 speakers giving me 50 watts per speaker.
Is it as simple as using a y connection of some sort from my effects loop out to each power amp? Or is there a way to send that signal to one and from that one piggy back the signal so to speak to the other and then all 200 watts to the cab?
Thanks in advance for any help.
My question is this, whats going to be the best way to use the preamp in my head with two seperate power amps. I have recently built a cabinet with 4 G12T-100 speakers in it. I have two Peavey Classic Series 50/50 Tube power amps coming to me and I was hoping to use them in mono (100 watts) both on this same cab where each power amp powers 2 speakers giving me 50 watts per speaker.
Is it as simple as using a y connection of some sort from my effects loop out to each power amp? Or is there a way to send that signal to one and from that one piggy back the signal so to speak to the other and then all 200 watts to the cab?
Thanks in advance for any help.