MIDI control footboard for Eventide pedals

[Sir M]

I'm want to contol 3 Eventide pedal with 1 footboard Midi controller... is that possible? to assign any patch from each of the 3 pedals to a single stomp button?

[THiwaTT]

I use a Digtal Music Corp Ground Control Pro (i use it with the gcx but it is possible to use without)
I use it with my timefactor and modfactor (and hopefully soon pitchfactor)
and i change patches on both pedals. And it has two expression pedal inputs for a vp-jr or equivalent to control parameters on the the 'factors

[shaneygoo]

the eventides are midi controllers if you are using them on your pedalboard and not in a rack you can just chain them together with short midi cables, turn on program change transmit and receive, they can send program changes and control changes which is what most midi controller do

one can control all three or you can also chain them into a circle and have them control each otherer, i used to split it up I had the modfactor limited banks 1-10 and timefactor to banks 10-20 so you don't have to bank up so much since they only have a bank up, you can y cable one aux switch to all three for bank down or tap tempo too if you want

they can also all 3 share one expression pedal for example controlling (intensity, mix, mix) or any of the 10 knobs on a per preset level

other than that any midi pedal i've seen w/ program change will do it

[Sir M]

Really?? Nobody?

Alright... recommend a good OD with "amp-like" tones or a Dumble tone... :banana

[Sir M]

I use a Digtal Music Corp Ground Control Pro (i use it with the gcx but it is possible to use without)
I use it with my timefactor and modfactor (and hopefully soon pitchfactor)
and i change patches on both pedals. And it has two expression pedal inputs for a vp-jr or equivalent to control parameters on the the 'factors


OK then.. I am Midi-deficient, so how difficult is it to program the Voodoo Lab Ground control to operate the 3 pedals?