Three 8 ohm speakers wired to 8 ohms...

[strings]

is it possible? I have a three speaker cab with weber 8 ohm speakers I want to wire for 8 ohms. If nothing else I will only use two but since three are in there I wanted to use them all. Thanks much!

[OnlyVees]

Couldn't you simply wire them in series?

[strings]

I believe that adds the ohms.

[mark norwine]

can't be done

[strings]

I had done some research and was afraid of that but wanted to check with those that knew more. Thanks for the the replies.

[Thames]

www.tedweber.com (http://www.tedweber.com) sells an impedance matcher thing... that might open up possibilities for ya

[donnyjaguar]

Parallel them and run 'em between the 4 and 8 ohm taps?

[mwm523]

If you run two in series for 16 ohm, and then run the third one parallel to that, you'll be at about 5.3 ohms. You could then safely run your amp at 8 or 4 ohms.

[mark norwine]

yes...but one speaker will absorb 50% of the power and be twice as loud. Not an ideal setup