Behringer Phase 90

[6Tones]

Anyone try one?
http://www.behringer.com/EN/Products/PH9.aspx
Worthy copy of the mxr?

[Thames]

dont waste your $$ on Behringer products... better get the M101 used @ 45-50$

[6Tones]

Well I just bought one any way out of curiousity .
Sounds pretty good.
Seems to be truebypass.
With out power the guitar signal is still there but if you click on the pedal it cuts the signal off..not sure if this is normal truebypass or not..?
There is a Internal Trim pot also ( anyone tweak theirs? )

Sturdy casing,slightly flimsy feel of the knob. Reliablity of the footswitch..time may tell.
I havent A/B it against a MXR but so far for 30$ it sounds pretty good.

[stinkfoot]

Pulling the power to see if the pedal passes signal is not a valid test for true bypass. If it does, the pedal might be TB, but it's just as likely (or more) to be "hardwire", where the circuit input is permanently connected to the input jack.

If it sounds good, it sounds good, I guess :)

/Andreas

[6Tones]

Pulling the power to see if the pedal passes signal is not a valid test for true bypass. If it does, the pedal might be TB, but it's just as likely (or more) to be "hardwire", where the circuit input is permanently connected to the input jack.

If it sounds good, it sounds good, I guess :)

/Andreas

With out power the signal only works when I click the footswitch.Dunno if its truebypass or more like the "simulated" TB that dunlop uses..
Was wondering more about the trim pot inside the pedal.Do the Mrxs have this ?