PDA

View Full Version : timmy and power supplys

ELA
10-01-2009, 04:34 PM
Hi all, I just contacted Paul C and ordered a Timmy, but I forgot to ask if the Timmy can be powered by a one spot. Center negative? Before calling him back I thought I would ask my question on this board since there are a lot of Timmy fans.

Yes I tried searching but to no avail.

Thanks in advance!
kriko71
10-01-2009, 04:36 PM
Yes it is center negative. So you can use a 'standard' one spot type of power supply
TenneyThe2nd
10-01-2009, 04:46 PM
Yep. Runs on a one spot--no problem. It is the "boss" barrel plug. It can be run at 18v off the DC Brick or PP2
ELA
10-01-2009, 05:07 PM
Very cool. Thanks guys!
mad dog
10-02-2009, 09:54 AM
I use a Godlyke Powerall with mine. Works great.
MD
Tone-Control
10-02-2009, 10:11 AM
So a boss adapter will work? Sorry, I don't use adapters but am going to purchase something soon.
willyredeemed
10-02-2009, 10:14 AM
i power mine with a nuclear reactor ;)
ELA
10-02-2009, 03:31 PM
i power mine with a nuclear reactor ;)


That's what I've been missing. Power and glow, all in one. :crazyguy
lespauldoc
10-03-2009, 08:19 AM
Yes, Boss power supply is fine.

I run a one spot myself, no issues!
sutherland
10-03-2009, 10:04 AM
Run it with a DC Brick, essentially a one spot/power all crammed into an enclosure.
bozobreak
10-28-2009, 02:07 PM
I've just got my Timmy and I would like to ask if it can be powered with 12 VDC?
Isaiah4Autumn
10-28-2009, 02:09 PM
I've just got my Timmy and I would like to ask if it can be powered with 12 VDC?

yes...paul has commented on this before but not above it as far as I know
Ming Chow
10-28-2009, 02:28 PM
I asked if my Tim could be run at 18v. He said 18v was ok. Don't know if a Timmy is any different. I've only run my Timmy at 9v.
buddachile
10-28-2009, 04:14 PM
Does the Timmy sound any different powered at 12V (or 18V)? Not that it needs to sound any better than it does at 9V...
marsos52
10-28-2009, 04:20 PM
mine works great with out any power

haha.... fuel tank works good .....