PDA

View Full Version : Prescription pedals - - SWITCH MANUFACTUER QUESTION

mullytron
11-09-2009, 05:15 PM
Anyone know what kind of stomp switches he uses? Or anyone here ever work on an Experience and can confirm a part# or mfr? I came across one that had the (3) switches raped out of it and am trying to bring it back to life. All 3 switch locations have 6 solder pads, in a configuration I don't instantly recognize. Any input would be much apreesh.
zombiwoof
11-10-2009, 03:08 PM
The obvious thing to do is contact them (PE) about the switches!

Al
analogmike
11-10-2009, 04:28 PM
The normal blue 3pdt switch will work just fine, small bear sells them. Just leave off one row

_ _ _
_ _ _
_ _ _

Don't use the X row

_ _ x
_ _ x
_ _ x
zombiwoof
11-10-2009, 10:28 PM
He said something about "6 solder pads", so I thought he meant it has board-mounted switches. Perhaps he can elaborate.

Al
Chonny
11-11-2009, 08:26 AM
Analog Man with a quick answer ftw.
mullytron
11-11-2009, 08:35 AM
Sorry fellas. Yes, these are directly PC-mounted, from what I can tell. Plus, the lug spacing looks different from the normal 3PDT switches we all know and love... I will check again, maybe the housings are not the same size and I can squeeze the blue ones in there...

Also, I did call PE and they said it's an old pedal, no longer supported, and he couldn't provide part# or mfr info. So if anyone has one they can open up and check the switches, I would be much obliged!
analogmike
11-11-2009, 09:20 AM
I see, board mounted switches. There are a few different Taiwan PC mount switch types, check small bear as he has most of them.