PP2 W/ Boss DD-20 giga delay

[guitargeek83]

Hey friends, I'm running a dd-20 off of the pp2, is this enough mA's for it? I plugged it in once and it wouldn't come on, and checked my george L's and one needed tightening, and then it came on. But I had heard that Boss doesn't reccommend the dd-20 running off of the pp2. Is this true??
Thanks

[jero]

Do you use the PP2 or PP2 plus? The PP2 might not have enough mA.

[guitargeek83]

I just have the pp2. Where can I go to check the info out??

[Jim S]

Works on my PP2 plus.

[jero]

The DD-20 requires 200 mA (see Boss website), the PP2 only delivers 10omA per output. PP2+ has two outputs that deliver more. If you want to keep the PP2 best is probably to use an Y-cable to double the mA (not the volt though!!).

[zephaniah zion]

Read Voodoo Labs' website closely. There power supplies are very well designed to cover most pedals for power. Power your DD-20 off the #5 or 6 outlets and you will have no issues. They did not just design those specific outlets for Line 6 pedals but Boss Dual pedals as well.

[jero]

I believe this was one of the upgrades for the PP2 plus, the original PP2 only had 100mA on output 5 and 6.

[guitargeek83]

Okay, I just went to the source itself. I called Vodoo and with just the plain PP2 I need use a y cable that they make which takes two of the outputs and puts them in parrell series which will double the mA and not the voltage, giving me 200mA that I need for the giga delay