How do I add the neck PU to the bridge position on a 5-way?

[gulliver]

If I put a jumper cable from the open lug on the 5-way and patch it to the neck + lug, will that combine the neck and bridge when the 5-way is in the bridge position?

I assume the neck will also be added to the bridge/middle position? Will it effect any other positions?

Will wiring a resistor (or pot) within the above jumper lower the amount of the neck pickup that will be added to the bridge?

http://www.guitarnuts.com/wiring/stratinnards.gif

Thanks.

[dlmjr2]

Only way I've found to do it is by installing a 5 way superswitch. It has a ton of lugs on it and you can get whatever combinations you want.

[BootRoots]

stewmac sells a Schaller Mega switch (model E) that is a 5-way where you can get the neck/bridge in the middle position.

[baimun]

A quick and dirty way to do it is use a mini-switch or push pull that does a "bridge on no matter what". That way, if you switch to the neck position and pull or flip the switch, you get Neck + Bridge. If you do the Neck + Middle and switch it... you get all three.

[smolder]

you can also wire in a blend pot and achieve the same results.

[gulliver]

you can also wire in a blend pot and achieve the same results.

Thanks for the responses. I do have a superswitch laying around, but I don't think I'll need it if the above works.

Are you saying the above is correct and will work?