Right Angle Speaker Cables?

[macquet]

Does anyone know if a company makes good quality right angle speaker cables? I need one for my epi valve junior head. I made a 1x12 cabinet and put the jack in the center/bottom of the back panel, and a standard cable won't fit when it is on my tilt back speaker stand.

[remocity]

Does anyone know if a company makes good quality right angle speaker cables? I need one for my epi valve junior head. I made a 1x12 cabinet and put the jack in the center/bottom of the back panel, and a standard cable won't fit when it is on my tilt back speaker stand.

Lava Cables: http://www.lavacable.com/

[Ding]

If your not into the whole gold plated jack thing, Radio Shack sells a right angle 1/4 inch female to male jack that you just plug your straight jack into and you have a right angle jack. No need to buy a whole new cable. I use some and they work fine as long as you unplug the whole jack from the cab and leave the right angle jack on the speaker cable. Just one possibility.

[hammersig]

If you made a 1x12 cabinet, then I suggest buying a right angle 1/4 inch ts plug and replacing the end on a speaker cable you may already have. Or get two and some cable and make yourself an extra. Very rewarding

[macquet]

Thanks for the tips...I guess I will just make my own.