PDA

View Full Version : Dumble OD trim values?

Normster
08-31-2005, 09:31 AM
Any idea what the value of these resistors are?
http://thenormster.com/dclone/dumble_OD_trim.JPG
scottl
08-31-2005, 02:25 PM
call me.

800-932-0037
TWreckXS
09-05-2005, 06:37 PM
Normster,

And the answer is ....... ? Inquiring minds would like to know and not bother Scott with a phone call.
Thanks,
Robert
scottl
09-06-2005, 08:32 AM
Apparantly Dumble was experimenting with an alternative to the usual series resistor into OD trim. There is a thread from several months ago on Ampage where these values are discussed. Also, check the Dclone folder on Blueguitar.org There is a zip file with a 90s schematic. It has a funky network as well. 47pf across 470k into 120k into 25k trim with a 4.7k tail to ground.

I think the picture above has a ground point in the middle. This would change the load on the CL2 cap and reduce some bass. IMO of course.

Scott
TWreckXS
09-06-2005, 09:25 AM
Thanks for the information Scott!

Robert