Hey guys, I have been doing some research online about my pedals and came across some info saying that you should never put a buffered pedal before a fuzz pedal. I have an interesting chain because I use a loop switcher as the heart of my pedalboard. I don't know which pedals I have that are buffers and which are not. I love my tone as it stands right now, but maybe it can it be better. Here's my chain: Note: I have pedals before the input of the loop switcher and pedals after it. This setup gives me a lot of flexibility: Guitar > Korg Pitchblack tuner > Jim Cantrell wah > Diamond Compressor > RC Booster > input to 4 loop switcher Loop A = Digitech Whammy 4 Loop B = Fulltone MDV-2 Vibe > EHX MicroSynth Loop C = EHX Micro Pog > EHX Tube Zipper > Earthquaker Devices Bit Commander Loop D = Fulltone OCD > Earthquaker Devices Hoof Fuzz 4 loop switcher output MXR Micro Amp > EHX Stereo Mistress > Stereo out to 2 amps My main concern are the pedals before the loop switcher. I don't know if the Diamond Compressor or the RC Booster are buffered pedals and how they are effecting this pedal chain or the fuzz pedal? Should I move them within the loops? Or should I leave everything as is? Any tips? Thanks guys, you have always been very helpful.