Early 70's Bandmaster Reverb (TFL5005)- thoughts? Good mods? Value?

Discussion in 'Amps and Cabs' started by reddgeetarzan, Jul 16, 2010.

  1. reddgeetarzan

    reddgeetarzan Supporting Member

    Joined:
    Aug 11, 2005
    Messages:
    3,079
    Location:
    T-O-N-E-H-I-O
    I have the chance to get one of these at a fair price- not a steal, but fair enough to consider. What are your thoughts on these? It had mallory caps on the board- they looked original, but I just don't know- the FENDER logos have the "tail" on them- the codes on the trannies have the 606- "0" that leads me to believe its a 1970, but I'm not certain. Looks like the one I might get has original RCA blackplates thru it too! The speakers are Fender Utah orange labels. The amp looks identical to this one:

    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270606456508&_trksid=p2759.l1259


    Thoughts? Are these a good cadidate for "mods" of any kind??

    Any info and input would be greatly appreciated!!!
     
  2. 335guy

    335guy Supporting Member

    Joined:
    Dec 26, 2008
    Messages:
    2,476
    Yeah, that would be a 1970. I had Ron Veil ( an well renowned Fender amp tech guy here in CA ) say that the Bandmaster Reverb circuit was nearly identical to a Super Reverb. Both used the AA 1069 circuit in 1970. So, if you like Super Reverbs ( many do ), then that is a head version of a 1970 Super Reverb.

    What I do not like is the overly large speaker cabinet. I didn't like them when Fender introduced them back then, and I don't like them now. I prefer the more compact 1965 and earlier size. I also don't care for the overly large head cabinet. I know they're stuffing a spring reverb pan in the bottom, but it just looks funky to me. I think Fender couldv'e trimmed a few inches off the height of that cab easily.

    As I understand it, these can be modded back to a Super Reverb "blackface" AB763 circuit fairly easily. That's typically what is done when one does mod a Super. The ones I played sounded pretty bright and clean.

    While these can be made to sound great, and are pretty great sounding as is, it seems to me Fender made these exceptionally and unnecessarily large purely to appear to be more than what they are. Many amp makers back then did that. Just real big boxes when smaller ones would have sufficed.
     
  3. blackba

    blackba Member

    Joined:
    Dec 10, 2005
    Messages:
    5,920
    Location:
    Michigan, USA
    I have a '69 Bandmaster Reverb, its a great amp. Its one of the few Fender amp head models that has reverb. I think Fender was worried about noise from the reverb, so they made the head cab very large. Its so large that you can actually fit 2 8inch speakers in the baffle of the head (seen a picture of one like that once). I agree with 335guy that the tall head cab and large 212 is pretty excessive. I to prefer the smaller 212. I made a new back for mine to make it opened back, which was a great change.

    The one slag on the Bandmaster reverbs is the small output transformer. A Super Reverb will have a large 2ohm output transformer. The one on the BMR is pretty small and saturates early, which I actually like. A BF/SF Bassman output transformer will work, if you want a more solid bottom end. I like mine stock. I would go for it, these are a great value on the used market.

    Here is a picture of mine.

    [​IMG]
     
  4. reddgeetarzan

    reddgeetarzan Supporting Member

    Joined:
    Aug 11, 2005
    Messages:
    3,079
    Location:
    T-O-N-E-H-I-O
    Thanks fellas! I can get the pair for $550.......whadya think??? If I get it, I'll get some pix up! Thanks again
     
  5. pine

    pine Supporting Member

    Joined:
    Apr 2, 2008
    Messages:
    470
    Location:
    Pennsylvania, a Jim Crow state
    I think that's a good deal
     
  6. Boogie92801

    Boogie92801 Supporting Member

    Joined:
    Aug 24, 2004
    Messages:
    2,001
    I had a cab made by Kerry from mine when I had it. If you tweek it a bit they are great sounding amps - mine broke up after 3 and was not as clean as some might lead one to think - but that was a good thing.
     
    Last edited: Jul 20, 2010
  7. blackba

    blackba Member

    Joined:
    Dec 10, 2005
    Messages:
    5,920
    Location:
    Michigan, USA
    That's a good price, I would go for it. I got mine before the economy dipped and actually paid more for just the head than that. I probably have too much into mine, but I am not planning to sell it. :)
     
  8. smolder

    smolder Silver Supporting Member

    Joined:
    Jun 16, 2008
    Messages:
    10,752
    Location:
    up in the rockies
    I'm wondering why you don't have it yet?
     
  9. Blue Strat

    Blue Strat Member

    Joined:
    Aug 2, 2002
    Messages:
    27,674
    Location:
    Sterling, VA (not far from Washington DC)
    Great deal. You couldn't find a similar hand wired modern HEAD (which will depreciate in value) for twice the price. It's a no brainer.

    Easily modded, but make sure it's at full operating potential before you decide to change it.
     
  10. retrobob

    retrobob Member

    Joined:
    Dec 11, 2005
    Messages:
    1,410
    Location:
    Western PA
    Grab it now!

    I sold my 69 BMR head for $600.
    $550 for the head & cab? No brainer. Those are great amps!
     
  11. reddgeetarzan

    reddgeetarzan Supporting Member

    Joined:
    Aug 11, 2005
    Messages:
    3,079
    Location:
    T-O-N-E-H-I-O
    Thanks again fellas! I did get the amp- its really nice. Sounds pretty good, but needs a little bit of TLC- the usual stuff, pot cleaning on the treble control. The verb is bleeding into the clean channel- it didn't come with a footswitch, but I think I have an extra somewhere.....doesn't have the screws to hold the head to the cab either, again, no biggie.

    Its pretty cool, especially at this price tag. I still dig my little BF Deluxe Verb, but this is a great amp for the $$$$

    THis seems like a very good candidate for some mods. I'll give David Allen a call- he's still in northern KY, right? Not too far from me!

    ;)
     
  12. telejammer

    telejammer Member

    Joined:
    Sep 4, 2007
    Messages:
    571
    Location:
    Pa.
    That Bandmaster Reverb is an exceptional amp IMO. I have owned one for close to 20 years and just recently put the chassie into a Super Reverb cab with 4-10's, My tech "blackfaced " it , did new filter caps, and a couple of nice mods that were done on it before. The reverb is on both channels and he also put switch on the rear of the chassie that turns off the vibrato from the circuit, thus adding some gain to the vibrato channel,works real sweet. He changed the OT ,reverb tranformer, and used a 5AR4 rectifier instead of the original 5U4. The amp was re-tubed with JJ 6L6's and RCA and Silvania pre-amp tubes. Speakers are Jenson P10R's . With a reissue faceplate looks just like an original "blackface" and its sounds absolutely fantastic! I also own an original "66" "blackface " Super Reverb and this amp sounds better than the original. Glad you were able to score the Bandmaster Reverb,they are worth every penny paid. Enjoy! If you ever decide to make a combo amp out of it, I have a 1-12 blond ,pine combo cab with a Weber California 12" ceramic 4ohm speaker in it that fits that chassie and the speaker matches the Bandmaster speaker load. I may be selling this in the near future
     
  13. reddgeetarzan

    reddgeetarzan Supporting Member

    Joined:
    Aug 11, 2005
    Messages:
    3,079
    Location:
    T-O-N-E-H-I-O
    Very cool Telejammer! Thanks for the info-
    I may be interested in that when you're ready to sell- let me know as I'd like to see pictures.

    You brought up an intersting point- these run at 4ohms, not 2ohms....
    Do you guys ever run them at 8 or 16 ohm loads???

    I'm curious to see what other speaker combos are working for you too.

    Thanks
    RG
     
  14. blackba

    blackba Member

    Joined:
    Dec 10, 2005
    Messages:
    5,920
    Location:
    Michigan, USA
    I have run mine at 8ohms and at 2ohms. At 8ohms, I found the BMR sounds a bit constipated for lack of a better word. 2ohms, it sounds find. 99% of the time though I run it at 4ohms. I would not recommend hooking up a 16ohm load.
     
  15. jay42

    jay42 Member

    Joined:
    Dec 20, 2006
    Messages:
    5,831
    Location:
    Sandy Eggo
    I have an older Allen SR/Bassman style with 2/4/8 ohm taps. It's the merde, pardon my French. Great buy. The cab is from a different era though....just as well, since the drip edge one is like 40" x 29".
     

Share This Page