How To Tell When You Need New Frets?

Discussion in 'Guitars in General' started by dwk302, Mar 8, 2013.

  1. dwk302

    dwk302 Supporting Member

    Joined:
    Jul 17, 2012
    Messages:
    1,201
    I've bought a new LP Traditional Pro last April. I haven't been able to put of it down since. I play it about an hour or two per night. Lately I've noticed a little bit of "roughness" on bends and vibrato around the 12th free on the G string. That's probably the position I play the most. I wondering if I need new frets. What are the symptoms of fret wear?
     
  2. Valus

    Valus Member

    Joined:
    Sep 28, 2010
    Messages:
    1,072
    Location:
    Tennessee
    It probably just needs a recrown and polish. Maybe just a polish. Can you see divots in the frets under the strings?
     
  3. TomDev

    TomDev Member

    Joined:
    Mar 17, 2010
    Messages:
    177
    That sounds more like you might need a fret dressing if it feels a little rough on the bends. That's a fairly new guitar, so I wouldn't expect the frets to need replacing yet, but you never know :rockin

    Signs of needing frets replaced might include difficulty with bends due to fretting out, buzzing in certain areas of the fingerboard and poor playability but those things can happen for other reasons, too.
     
  4. LPSlinger

    LPSlinger Member

    Joined:
    Apr 22, 2005
    Messages:
    1,364
    Location:
    Charlotte, NC
    You just need to polish the frets. You can do this with steel wool. Be sure to mask off the wood of the neck/fretboard with painters or masking tape to protect it. Also, be sure you cover up the pickups! I like to take a trash bag and cover my guitar's entire body just to be safe. I tape the trash bag around the bottom of the neck. If metal shavings from the steel wool get into the pickups it can short them out. Just polish the frets up a little until they get a good shine going and this will take the grittiness out when the string slides on the fret for a bend.

    Some guitars are worse than others. I have an Epiphone that I have to do this to ALL the time if I forget to wipe down the frets after I play. For some reason my sweat in conjunction with the coating on my Elixir strings and the fret material makes that guitar's frets corrode and grind badly...I suspect the frets are made of a cheaper material because I don't have the problem nearly as badly on any of my other guitars. A little steel wool fixes it right up. Just take your time and be careful.
     
  5. Sconnie

    Sconnie Member

    Joined:
    Mar 7, 2013
    Messages:
    294
    Location:
    Boulder
    Its impossible to tell without pictures, and still hard to tell with them. I just had mine done on a 7 year old SG, the frets were flat on the upper register from bending and vibrato so the intonation was off. Divots and "kinks" are good indicators too. Just take it to your local lutherie and they will let you know if you need it or not. Mine ended up costing about $200 including the set up and bridge notching I had done since I was installing a Callaham ABR-1. Freshly crowned frets feel great though! You will play it more if you do get them done, word to the wise!...
     
  6. scolfax

    scolfax Supporting Member

    Joined:
    Oct 15, 2008
    Messages:
    5,066
  7. dwk302

    dwk302 Supporting Member

    Joined:
    Jul 17, 2012
    Messages:
    1,201
    Great advice. That your all.
     
  8. G Man

    G Man Supporting Member

    Joined:
    Apr 24, 2009
    Messages:
    908
    Location:
    W. MA.
    gorgomyte is the answer
     
  9. Selsaral

    Selsaral Member

    Joined:
    Dec 14, 2009
    Messages:
    1,729
    Fret buzz at only 1 fret is a classic sign your frets are uneven.

    I use to practice bends and vibrato with WAY too much pressure and I'd get that rough feeling you describe.

    I since re-built my bending technique, and I use way less pressure and force, and I haven't experienced the roughness once in about two years of intense play.

    It's true that a polish may help, but in my experience it's a technique issue.
     

Share This Page