Real Dumb Velcro Question (Eventide)

Discussion in 'Digital & Modeling Gear' started by EDS, Mar 2, 2008.

  1. EDS

    EDS Supporting Member

    Joined:
    Oct 28, 2006
    Messages:
    302
    Why can't I get my velcro to stick to my timefactor? Anyone else have this problem?

    (I'm talking about the sticky side attached to the pedal side - it doesn't stick well to the rubber back.)
     
  2. EDS

    EDS Supporting Member

    Joined:
    Oct 28, 2006
    Messages:
    302
    Bump for a dumb question!
     
  3. nibus

    nibus Member

    Joined:
    Aug 20, 2007
    Messages:
    2,452
    Location:
    Utah
    I actually peeled off the rubber part, and stuck it to the top of the box in case I ever need it again.
     
  4. GuitaristZ

    GuitaristZ Guest

    supagloo!!
     
  5. albuht813

    albuht813 Supporting Member

    Joined:
    Jan 10, 2006
    Messages:
    257
    Location:
    Chicago, IL
    you're not the only one! You've gotta peel the rubber off. It actually comes off quite nicely.
     
  6. EDS

    EDS Supporting Member

    Joined:
    Oct 28, 2006
    Messages:
    302
    Thanks for all your help. The rubber back seemed to be stuck on there pretty good, so I didn't want to remove it without knowing that was necessary. Thanks!
     
  7. slopeshoulder

    slopeshoulder Senior Member

    Joined:
    Dec 13, 2006
    Messages:
    7,938
    +1 rubber off.
     
  8. yellowecho

    yellowecho Member

    Joined:
    Jan 19, 2006
    Messages:
    3,294
    Location:
    Alabama
    I wanted to bump this thread because I received my Eventides a few days ago.
    You actually don't need to remove the rubber...
    You can flip the bottom plate inside out so the rubber bottom is inside, then just velcro the inside (now outside) of the plate.
    It's a tight fit, so be careful... but it can be done and I think it's the best way.
     

Share This Page