Hamer Artist 3 pickup wiring question

[michaelprice83]

I have a Korina Hamer Artist 3 P90 guitar that I love. It has a 5-way switch that allows stratlike pickup combinations. I would really like to get it wired in such a way that I could combine the neck and bridge position. How can I achieve this? I wouldn't mind losing the middle-bridge notch position in favor of the neck-bridge. Does anyone have a schematic I could see?

[Mike_C]

Cool Guitar I don't have a schematic but I have mine wired as Vol (neck and bridge) Master tone and vol middle pickup. with the three way toggle you can get every combination available. Just have a repair person replace the five way selector with a three way toggle switch and do the wiring as described above. Good luck BTW that is my Hamer Standard. Great guitars.

[blueguitar]

Easy! Just swap the middle and neck leads at the switch. Of course your switch positions will now be different for p/up selections but when you get the hang of it your there. Otherwise, you will need a dedicated control knob or mini-switch to do the job.

[michaelprice83]

Originally Posted by blueguitar

Easy! Just swap the middle and neck leads at the switch. Of course your switch positions will now be different for p/up selections but when you get the hang of it your there. Otherwise, you will need a dedicated control knob or mini-switch to do the job.

so then my combinations would be middle middle-neck neck neck-bridge bridge ??

[michaelprice83]

i think it might be easiest to add a mini switch