Dumb DLS question

[Kitten Cannon]

So I just got a Mk II last week and used it all weekend. Nice sounding pedal. I'm just curious if I'm using it wrong or something, though... seems that the volume jump I get from stomping the pedal is HUGE almost anywhere I set the preamp gain and master volume. Is this a pedal people usually just leave on and set the volume level there? Am I perhaps setting it up wrong?

I seem to remember having a similar issue with a Formula No. 5. Sounded awesome, but it was so loud it was practically unusable. It made a quiet amp so loud I may as well have just cranked up the amp.

[mrclean77]

Only Catalinbread I have used, but my v2 (MkI) is not TOO loud....I can get to unity at a little less than 50% volume

???


You got it new? Any chance somebody fiddled w/it?

[shakeshakeshake]

weird, never had this problem with a DLS or F5,

did you use both on the same amp?

[Han Solo]

Originally Posted by mrclean77

I can get to unity at a little less than 50% volume

Same here.

Compared to some of my other pedals my DLS isn't that loud at all.

[Kitten Cannon]

So what are some sample settings some of y'all are using? I wish I could tweak more at home, but if I do I have a neighbor who will probably come upstairs and eat me.

[exodus]

i use it at 18volts... with the pedal volume knob at about 9 o'clock, it sounds at about unity volume to me. (other knobs somewhere around noon to 2 o'clock)

[a1briz]

I use this pedal for 'bedroom kids asleep in the next room, 1AM' volume levels no problem. Unity for me is also around 10 or 11AM on the master volume. Same with my RAH.

[Kitten Cannon]

Maybe I've got the fullness knob too pushing too much... hm. I was running with that most of the way up, presence at 0, preamp at 0. Using a Tele with a bright amp, and not wanting to melt too much face, that seemed to work best, but the master was barely at 9:00.

[exodus]

Originally Posted by Kitten Cannon

Maybe I've got the fullness knob too pushing too much... hm. I was running with that most of the way up, presence at 0, preamp at 0. Using a Tele with a bright amp, and not wanting to melt too much face, that seemed to work best, but the master was barely at 9:00.

sounds about right to me. i also have the original dls and unity volume with my amp is around 9 o'clock. there is a TON of volume on tap.

[mrclean77]

Tone - 10:00
Vol - 11:00
Gain - 2:30
Rock


With gain and vol set like that, there's a noticeable boost, not a makes-me-wanna-run-at-my-amp-to-turn-it-down boost