|
#1
|
|||
|
|||
|
Carr Slant 6V Speaker change.
Has anyone changed out the stock Kingpin 60 for another speaker and if so, what were your results?
|
|
#2
|
|||
|
|||
|
I swapped out the Kinpins in my Slant 6V 2x12 for Greenbacks. I was also using a lower voltage rectifier.......5U4 as I recall. This rectifier combined with the less efficient GB speakers made it so I could get the amp to crunch on the clean channel and the gain channel sounded fantastic......more Marshally.
|
|
#3
|
|||
|
|||
|
Thanks. Greenbacks are my first choice as well. Didn't think about the rectifier though.
|
|
#4
|
|||
|
|||
|
Sometimes I'll run my Slant 6 into a bogner 2x12 with a greenback and a g12H. I'll also run it into a Dr.Z 4x10. Those two, as well as the stock kingpin in the 1x12 Slant 6 all sound great, just different. The 2x12 is a clearer, more bass heavy sound.
|
|
#5
|
|||
|
|||
|
I've used my Boogie 2x12 with v30s and it sounds great. I just don't want to lug both to some gigs (getting too old/lazy).
|
|
#6
|
|||
|
|||
|
I had a head box made for my Slant 6V so I could combo it or head/cab it.
|
|
#7
|
|||
|
|||
|
Who did the head box for you? I spoke with Mike Carr about buying a box from him, but he really didn't want to do it. He wanted me to ship him the amp and he would make the change.
|
|
#8
|
|||
|
|||
|
I ran a Celestion CL80 in mine for bit. Sounded good.
|
|
#9
|
|||
|
|||
|
Quote:
|
|
#10
|
|||
|
|||
|
Vibroworld made me a custom one a few years back.
http://www.vibroworld.com/ |
|
#11
|
|||
|
|||
|
Quote:
rockster120@msn.com |
|
#12
|
|||
|
|||
|
Quote:
Budman |
|
#13
|
|||
|
|||
|
Quote:
|
|
#14
|
|||
|
|||
|
Thanks for all the input guys. I think I'm going to try the v30. I'll let you know what I think later.
Bw |
|
#15
|
|||
|
|||
|
I had the 6v head, and tried it with several set ups. I didn't like it with V30's at all. The Scumback green backs are awsome, but I liked the 6v with Weber 1230-55's best. I like the scumbacks the best with my new amp though.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|