|
#1
|
|||
|
|||
|
How quiet is your carr slant 6v
I have a fair amount of hum at idle coming from my slant 6v. channel 2 is worse, ( real noisy set for high gain ). channel 1 is by no means quiet either. Its been retubed, rebiased, an gone over by a tech. I know my house power isn't perfect, and I do use a power conditioner to keep the noise down. SO... I was just wondering how yours was ?
|
|
#2
|
|||
|
|||
|
Dead quiet. Probably the most his/noise free amp I've owned. :AOK
__________________
"Play like you have something to say, not something to prove." the bluestate band The Club Fox Redwood City Blues Jam |
|
#3
|
|||
|
|||
|
Mine is fairly noisy. When I first got it, I had a lot of hiss on the clean channel, but the OD channel was dead quiet. I thought that was strange, so I emailed Carr and they said it was normal.
Lately I've been trying NOS tubes and now I get a fair amount of hum as well. Not sure what I can do about it. |
|
#4
|
|||
|
|||
|
The one that I played with at a store was very noisy, now that I think about it. I'd wanted one for a while, but the real thing was quite a disappointment on many levels. The Mercury and Rambler are both very quiet and nice sounding though.
|
|
#5
|
||||
|
||||
|
Mine has a bit of that idle noise as well, so does a friend of mine's...I guess it's normal. I've heard worse. I was surprised that the Komet 60 has a similar noise.
Greg
__________________
This apparatus must be earthed. |
|
#6
|
|||
|
|||
|
I have a Rambler and I have to concur.........its the quietest amp I have ever owned. ............... Shielding everywhere..........the speaker wire is HUGE. A Very well made product.
|
|
#7
|
|||
|
|||
|
Depends on where it is plugged in. If it is in a circuit with a dimmer, it hums like a banshee. If plugged into a dedicated line (which I had installed) for my amps, it is stone quiet.
__________________
Resident Geezer |
|
#8
|
|||
|
|||
|
Mine is dead quiet. What type of guitar are you using? I get a little noise with a strat but that happens with ANY amp I plug the Strat into. With my R7 the Slant 6 is dead quiet.
Budman |
|
#9
|
|||
|
|||
|
Quote:
My wife smiles now~~~~~ :AOK |
|
#10
|
|||
|
|||
|
my Carr Slant 6v is dead quiet
|
|
#11
|
|||
|
|||
|
I have the Slant head. It's absolutely silent in all settings. If I get any noise at all I know the Slant is not the source.
|
|
#12
|
|||
|
|||
|
Mine is very quiet but its turned off right now.
![]() Let me turn it on and see. Yep, still pretty darned quiet. I don't have a problem with noise. I just wish it were a little brighter sounding. |
|
#13
|
|||
|
|||
|
Is the hum 60Hz, 120, or 180 Hz? Power conditioners and filters can do a reasonable job of filtering out RFI and other high frequency noise, but low frequency multiples of 60 Hz that come from motors (like a fridge) dimmers, or the newly popular fluorescent replacements for incandescent lights, are very difficult to filter.
__________________
There are no such things as wrong notes, there's only the look on your face. |
|
#14
|
|||
|
|||
|
My 6v (one of the first heads) had a hiss on both channels. i emailed Steve and he said he had a fix if I wanted to send it in. It really never bothered me, I've had much worse, so I never sent it in. I don't remember it hissing when I first got it, but I picked up used so it might have been there. But you might try emailing him.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|