Real Dumb Velcro Question (Eventide)

[EDS]

Why can't I get my velcro to stick to my timefactor? Anyone else have this problem?

(I'm talking about the sticky side attached to the pedal side - it doesn't stick well to the rubber back.)

[EDS]

Bump for a dumb question!

[nibus]

I actually peeled off the rubber part, and stuck it to the top of the box in case I ever need it again.

supagloo!!

[albuht813]

you're not the only one! You've gotta peel the rubber off. It actually comes off quite nicely.

[EDS]

Thanks for all your help. The rubber back seemed to be stuck on there pretty good, so I didn't want to remove it without knowing that was necessary. Thanks!

[slopeshoulder]

+1 rubber off.

[yellowecho]

I wanted to bump this thread because I received my Eventides a few days ago.
You actually don't need to remove the rubber...
You can flip the bottom plate inside out so the rubber bottom is inside, then just velcro the inside (now outside) of the plate.
It's a tight fit, so be careful... but it can be done and I think it's the best way.