Become a Supporting Member


Go Back   The Gear Page > The Gear Page Lounge > The Sound Hound Lounge

Reply
 
Thread Tools Display Modes
  #1  
Old 04-13-2009, 09:28 AM
jeffh jeffh is offline
Senior Member
 
Join Date: Jul 2002
Posts: 801
Flooring for home studio, what to use ?

I am having a room built in my basement, double walls, ceiling and using Quiet Rock for sound absorption. The guys today said it would be done by April 28, can't wait. Been a long time wish of mine.

Any ideas on what to use for flooring ? I have heard cork is good, but it might be a little bright, any particular carpets to use or not use ?
Reply With Quote
  #2  
Old 04-13-2009, 09:59 AM
Luke Luke is offline
Senior Member
 
Join Date: Aug 2005
Posts: 10,980
Do you want reflection, then hard wood.

Want absorption, then carpeting.

Does it get wet down there?
Reply With Quote
  #3  
Old 04-13-2009, 10:33 AM
jeffh jeffh is offline
Senior Member
 
Join Date: Jul 2002
Posts: 801
No problems with moisture at all.

The room is 15x12. I am thinking the reflection might be problem, but the best sounding stage I ever played on was hardwood with low ceilings. It was very alive, not sure how that would work in a closed room ?
Reply With Quote
  #4  
Old 04-13-2009, 10:44 AM
fullerplast fullerplast is offline
Banned
 
Join Date: May 2003
Posts: 6,884
IMHO, go with hardwood and add carpets as needed. You can always deaden a room easier than liven a room......
Reply With Quote
  #5  
Old 04-13-2009, 11:27 AM
dimperdoo dimperdoo is offline
Senior Member
 
Join Date: Oct 2008
Location: in my home studio
Posts: 236
Quote:
Originally Posted by jeffh View Post
...the best sounding stage I ever played on was hardwood with low ceilings. It was very alive, not sure how that would work in a closed room ?
as a thought - perhaps one end wall could be comprised of traps? Essentially, set your sound stage up as you envision - then try to mimic "off into the abyss" on one end.


Quote:
Originally Posted by fullerplast View Post
IMHO, go with hardwood and add carpets as needed. You can always deaden a room easier than liven a room......
Not only that... make as much of your sound reinforcement mobile and temporary as you can. The more you learn about it - the more you may find what you have set up is the opposite of what you actually want. -maybe?
__________________
\m/ o_o \m/ great transactions w/ chaz, C.SCAN3, ricardito, V-Picks, ecm1117, Brad J
Reply With Quote
  #6  
Old 04-13-2009, 12:14 PM
JCM 800 JCM 800 is offline
Silver Supporting Member
 
Join Date: Feb 2007
Location: Twin Cities, MN
Posts: 2,409
The floor should be wood.
Reply With Quote
  #7  
Old 04-13-2009, 12:16 PM
Autopilot Slim Autopilot Slim is offline
Member
 
Join Date: Aug 2006
Location: The Big Smoke
Posts: 120
how about cork?
__________________
Cheers,
Dan

I was so much older then, I'm younger than that now.
- Bob Dylan

www.davidrotundo.com
Reply With Quote
  #8  
Old 04-13-2009, 12:19 PM
Luke Luke is offline
Senior Member
 
Join Date: Aug 2005
Posts: 10,980
Quote:
Originally Posted by jeffh View Post
No problems with moisture at all.

The room is 15x12. I am thinking the reflection might be problem, but the best sounding stage I ever played on was hardwood with low ceilings. It was very alive, not sure how that would work in a closed room ?
I'd go carpet then.
Reply With Quote
  #9  
Old 04-13-2009, 12:25 PM
Bryan T Bryan T is offline
Senior Member
 
Join Date: Aug 2002
Location: Los Angeles, CA
Posts: 11,169
How high are the ceilings?
Reply With Quote
  #10  
Old 04-13-2009, 12:27 PM
jeffh jeffh is offline
Senior Member
 
Join Date: Jul 2002
Posts: 801
The ceilings are 8 ft
Reply With Quote
  #11  
Old 04-13-2009, 01:16 PM
Glide Glide is offline
Senior Member
 
Join Date: Aug 2006
Location: Atlanta, Ga.
Posts: 1,381
Acid stained and etched concrete.
__________________
"Forward!", he cried (from the rear) - and the front rank died.
And the general sat, and the lines on the map moved from side to side.
Reply With Quote
  #12  
Old 04-13-2009, 01:46 PM
dimperdoo dimperdoo is offline
Senior Member
 
Join Date: Oct 2008
Location: in my home studio
Posts: 236
Quote:
Originally Posted by Luke View Post
I'd go carpet then.
I agree - the OP will want carpet. But, the flexibility of being able to choose different materials is important too.

On another note...

What's the purpose of the room? i.e. will it just be you in a project studio? a jam room? will there be a drumset?
__________________
\m/ o_o \m/ great transactions w/ chaz, C.SCAN3, ricardito, V-Picks, ecm1117, Brad J
Reply With Quote
  #13  
Old 04-13-2009, 02:00 PM
Glide Glide is offline
Senior Member
 
Join Date: Aug 2006
Location: Atlanta, Ga.
Posts: 1,381
I absolutely would not put carpet on that floor.

If it is concrete leave it concrete and cover it with a rug. Which is really good when you want a live floor, you can remove the rug.

If you put carpet in, you are tied to it. And it is about 1000 times harder to maintain than acid stained concrete.

Here is mine with a rug and without.





I also would not use Quiet Rock.

Go with a Double layer of 5/8" sheetrock with green glue between.

I would also recommend a double solid door assembly. It will help tremendously.



Also, quiet rock is not Sound Absorption Jeff. It is Sound Proofing. And double 5/8" drywall with green glue will give you a lower vibration response and it is less expensive and easier to work with than quiet rock.

For sound absorption you want 703 after the room is built. www.atsacoustics.com

You can get them in cases of 6 and cover them yourself.

Here is my front wall - still a work in progress. The corner black bass traps are doubled 703 panels (4 inches thick) that I covered myself.
There are 24 panels in just this photo.



There is also a 703 cloud above that I covered with white muslin. You want a live floor - dead ceiling.
You can also see some of the panels that I still have left to cover around the walls.



I crank the 68 plexi at midnight and don't bother anyone in the house sleeping.

Good luck with your project.
__________________
"Forward!", he cried (from the rear) - and the front rank died.
And the general sat, and the lines on the map moved from side to side.

Last edited by Glide; 04-13-2009 at 02:35 PM.
Reply With Quote
  #14  
Old 04-13-2009, 02:26 PM
dimperdoo dimperdoo is offline
Senior Member
 
Join Date: Oct 2008
Location: in my home studio
Posts: 236
Quote:
Originally Posted by dimperdoo View Post
Not only that... make as much of your sound reinforcement mobile and temporary as you can. The more you learn about it - the more you may find what you have set up is the opposite of what you actually want. -maybe?
I guess I never stipulated - YES hard floor (wood/concrete/?)

KEEP YOUR OPTIONS OPEN

if you throw a rug down for a session (or a few months/years) you can always pick it up when you want a more "live" room.
__________________
\m/ o_o \m/ great transactions w/ chaz, C.SCAN3, ricardito, V-Picks, ecm1117, Brad J
Reply With Quote
  #15  
Old 04-13-2009, 02:34 PM
alschnier alschnier is offline
Silver Supporting Member
 
Join Date: Jul 2006
Location: upstate, ny
Posts: 320
I have a sim. room in my basement that doubles as control room/overdub space. it's also big enough to rehearse in (console @ one end, drums at other, amps, keys, outboard along the walls).

I went w. double sheetrock & pine plank floors. the room was very much alive when I 1st moved in (even w. all of the gear in there). you'd be surprise what some strategically placed acoustic tiles will do. took care of the corners, sections on either side of console, behind the desk, rear walls, etc. & it sounds great in there now.

very glad I went w. wood. a carpeted room would've been dead & never would've recovered. also went w. an eco-friendly water based seal on the pine & it's nice & 'reliced' now. floor looks great.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:43 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Copyright ©1999-2013, The Gear Page, LLC, Brian Scherzer
All rights reserved.
Header Graphic by NetThink 21