Can you help me find a schematic to wire this simple PU setup?

[sidehatch]

Going in a LP style guitar.

I have a Dimarzio Virtaul PAF 4 conductor plus ground(Green,red,white,black and bare)

gibson 57 classic 2 conductor white and braided metal.

I want the dimarzio in the neck,57 classic in bridge

I want to add a coil tap switch on the neck PU only(cause thats all I can).

I have a 3 way switch.

I want 1 volume and 2 tones and the neck coil tap. I can leave the 4th pot unattached unless you can think of something cool to do with the pot but I really dont need it.

I cant find it on seymores site or any other.

Any help will be very appreciated!!

Thanks

Shane

[tfaith08]

http://www.seymourduncan.com/support/wiring-diagrams/

[walterw]

if you didn't want a "dead" knob, you could swap it for a 2-way rotary, and use that to switch the coil split on the dimarzio. plus, that way the guitar would still look stock.

[sidehatch]

That would be sweet!

Any idea of where I can get a schematic?


I Wired it up stock to see how I like that dimarzio and its one of the nicest sounding buckers I've ever heard in the neck!

My neck tone is working reverse though. I wonder whay that is?