Would you plug the JamMan into the RP350 or vice-versa?

[dougb415]

I have a JamMan and plan on getting an RP350. I tried an RP355, plugging that into the JamMan, then on to the amp. When I play along with the loops using my acoustic / electric by itself all seems okay, but if I plug the guitar into the RP355 and then into the JamMan, it seems like there is a limiter in the JamMan that cuts the signal from the RP355 when it gets hot.

I don't plan on doing any live looping; the JamMan will be used to play some pre-recorded backing parts only. I could run each pedal into a mixer, then out to the house board, but I'd rather not if I don't have to.

Anybody else doing something like this in a live situation?