Voo Doo Labs Pedal Power 2

[calmepeter]

Just wondering if this can power a micro pog. I looked through the manual and it says it powers a holy grail, but their isn't much more information than that about ehx pedals. help me out.

[byrel]

it should power it just fine

[calmepeter]

what about a pedal like the ehx memory man with hazarai? could it pedal both the micro pog and the memory man w/h at the same time?

[peterjh85]

I use my vl pp2+ to power a micro pog - no issues here. Be sure to use outputs 5 or 6 as the micro pog is pretty power hungry (~150+ ma I think)

[byrel]

Originally Posted by calmepeter

what about a pedal like the ehx memory man with hazarai? could it pedal both the micro pog and the memory man w/h at the same time?

it should be able to power anything that is 9/18V <200mA

MM should also be fine

[jborges]

Earlier today I plugged my micro pog into the pp2 but forgot to go output 5 or 6... It works for a bit then out of no where..this LOUD whirling noise followed by something that sounds like a plane wreck. So yeah it works. make sure it is the right output though.

[Andrizzle]

Originally Posted by peterjh85

I use my vl pp2+ to power a micro pog - no issues here. Be sure to use outputs 5 or 6 as the micro pog is pretty power hungry (~150+ ma I think)

THIS!

I'm not sure which ones I'm using, but when I put it on one of the wrong one it flashes on and off and buzzes. Either way, it WILL work, I use one almost every day.

[calmepeter]

i was thinking about modding my dl4 to DC power. would i still have to run it in either the 5th or 6th output on the reg dc setting?