|
#1
|
|||
|
|||
|
Trim Pot in Fulltone Clyde (settings?)
For anyone who has the Fulltone Clyde: Have you tweaked the internal trim pot inside the pedal, and what setting(s) for it do you prefer and why?
|
|
#2
|
|||
|
|||
|
completely ccw or around 5 o'clock
__________________
-Capt'n Zero |
|
#3
|
|||
|
|||
|
What does that trim pot does?
|
|
#4
|
|||
|
|||
|
I had a Fulltone Clyde for a long time (just recently sold it). I tried adjusting the trimpot inside, but I found that it didn't really make much different to the sound. I ended up just putting it back to the original setting. Could be that it makes more difference depending on your other gear?
__________________
"Assistant to the Travelling Secretary" My songs : http://www.soundclick.com/derekbarlas |
|
#5
|
|||
|
|||
|
Internal Resonance Control: Gain & Bass Response
@ 2:00 = Stock 60's Vox (should be marked by Fulltone) CW = More Gain & Bass
__________________
Acoustic Music From Earth Website: http://www.bouxlevinexperience.com A+ Deals: PM Me For A Full List |
|
#6
|
|||
|
|||
|
Thanks for the suggestions so far guys. Yes, it's "stock setting" is in the 2:00 spot, and it is marked there from the factory. Might try tweaking the knob this weekend and see what happens. Thanks again.
|
|
#7
|
|||
|
|||
|
Fully clockwise. I likes my bass, I does.
|
|
#8
|
|||
|
|||
|
I tweaked mine recently from the stock setting. Can't remember which way but it sounds much better with my rig now.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|