|
#1
05-27-2011, 11:07 AM
|
|||
|
|||
|
What size neck for Epiphone Accu Bass?
I need to quote a job replacing a bass neck for a guy. He has an Epiphone Accu Bass, 34" scale length. What I need to know is the width of the neck pocket if anyone knows so I can start looking for a replacement neck. Thanks!
__________________
If it's not loud enough you need a bigger amp! Peavey JSX head, Peavey VTM 60, XXL 4x12, VTM 4x12, Schecter C-1+, ESP LTD Viper 1000, '08 Gibson Standard, '80 Vantage bass, '65 Framus Strato de Luxe, '84 Fernandes Revolver 
|
|
#2
05-27-2011, 01:22 PM
|
|||
|
|||
|
if they made it to fender specs, than any replacement fender neck should work.
if they didn't, then this is not a practical repair, as you could buy a better bass for less than it would cost. frankly, any used squier p-bass would be an upgrade, so it may not be a cost-effective repair anyway. what's wrong with the original neck?
__________________
Walter Wright Guitar Repair Gnome Alpha Music, Va Beach
|
|
#3
05-27-2011, 10:47 PM
|
|||
|
|||
|
Guy wants to put a reverse headstock on it, do his own mod kinda thing. This bass makes a good project for a hotrod plus I think it has some sentimental value to him as well. Thats why I was asking if anyone knew off hand what it was as its a lot easier to find a replacement neck that fits it without any additional routing.
__________________
If it's not loud enough you need a bigger amp! Peavey JSX head, Peavey VTM 60, XXL 4x12, VTM 4x12, Schecter C-1+, ESP LTD Viper 1000, '08 Gibson Standard, '80 Vantage bass, '65 Framus Strato de Luxe, '84 Fernandes Revolver
|
|
#4
05-27-2011, 10:48 PM
|
|||
|
|||
|
But I do agree, not cost effective since you can get a bass for a what a decent neck costs...
__________________
If it's not loud enough you need a bigger amp! Peavey JSX head, Peavey VTM 60, XXL 4x12, VTM 4x12, Schecter C-1+, ESP LTD Viper 1000, '08 Gibson Standard, '80 Vantage bass, '65 Framus Strato de Luxe, '84 Fernandes Revolver
|
|
#5
05-29-2011, 09:29 AM
|
|||
|
|||
|
Wow, no one here has an Epi bass to measure? I guess I'll go ask some pros at another forum..lol!
__________________
If it's not loud enough you need a bigger amp! Peavey JSX head, Peavey VTM 60, XXL 4x12, VTM 4x12, Schecter C-1+, ESP LTD Viper 1000, '08 Gibson Standard, '80 Vantage bass, '65 Framus Strato de Luxe, '84 Fernandes Revolver
|
|
#7
05-30-2011, 05:43 PM
|
|||
|
|||
|
If its MIK, pretty much a Hondo Fender bass copy with a different headstock.
__________________
"We'll get together up in Ishpeming" -Fred "Sonic" Smith "Its a strat...its supposed to sound like that"- CG
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
