Pedalboard : The How to...

[Harmonix]

Hi,

I have a few pedals that i want to put on a board.

I've read it makes a difference where some pedals are in the chain. Therefore, I seek your advice.

I have a:

Dunlop Wah
MicroPog
TS9
BD-2
DOD Grunge FX69
DD-3
DeluxeMemoryMan
Line6 DL4
CE-2
TR-2

**Can the VoodooLab Power Pedals can power it all??????**

Thanx

[Championguitar]

to figure out where stuff goes in a chain you just experiment. try different things in different places until you find a sound your happy with

[asatbluesboy]

The MicroPOG, the DD-3, the DL-4 and possibly the DMM will need their own outputs (the higher-current ones). The others can be daisy-chained with custom cables. Bear in mind the DMM runs off a higher voltage (18V?), so you'll need to adjust that with the DIP switch. Also, the DL-4 needs 12V if I remember right, and you will need a "reverse" cable (center positive) to run it off DC.

[x-ray specs]

http://www.robertkeeley.com/faq.php#Effect%20Order

[Harmonix]

Thanks alot for the recommandations

[Harmonix]

Thanks alot for the recommandations

[Harmonix]

Thanks alot for the recommandations....im a first timer whent it comes to pedalboards. I will surely experiment with the pedal orders. But you think the DD-3 needs it's own output...why not daisy chain it as well??