PCM80 programing

[Electro]

I have a Lexicon PCM 80 that I have no patience to program. I need to create a simply dual delay with one set at 500ms and the other at 350ms with a plate reverb also. If someone can send me instructions on how to program this exact effect, I would be glad to pay you for your time.
Thanks
Brian

[Geetarpicker]

I don't have any experience with the PCM80 (but I love my dirt simple old PCM60!) however if nobody here replies I bet you will have some luck over at the "Gearslutz" forum. The studio guys hang out there.

[Electro]

Thanks, I'll also check there

[geetarman]

Go to www.hugeracksinc.com lots of guys familiar with the pcm-80 there.

[Electro]

You would think in this economy I would be able to find someone who I could pay to program for me.
Anyone?

[FuzzGazer]

Originally Posted by Electro

You would think in this economy I would be able to find someone who I could pay to program for me.
Anyone?

I know this is crazy talk but, have you tried calling Lexicon?

[LouRossi]

Ok. I'll try to follow up w/ a PM to fill in the gaps but in the meantime go to
Program bank: "P1 3.5 'dial a delay'"

Click edit and go 'down"
0.0 Controls Mix: wet: 50% 0.3 efx mix 50%
1.1 reverb time (set to what you need)

now for the delay time go down to 4.0
4.0 Delay Time Master 100%
4.1 DelayTimeVoice1 set 500ms
4.2 DelayTimeVoice2 set 350ms
4.3-4.6 set for 0ms

6.0 feedback master 25%-30%
7.0 panning master 'C'
7.1 '25 L' 7.2 '25 R' or if you don't want stereo just make them 'C' too

of course there will need to be some more edits w/ all the reverb parameters but that should get you in the ballpark....

[Electro]

Wow Lou you are the King, I will try this when I get home from work