Eventide Tap out??

[kev1n]

Is there a way to synch a pedal with tap tempo with a time factor? So like a tap tremolo synched to my delay?

[crxshdxmmy]

Through MIDI, yes (so long as both pedals are MIDI enabled) — otherwise, I doubt it.

[Tibbonds]

Depends on the pedal. Like Nick says, through MIDI it's possible with some units. Otherwise, you could use an external tap tempo switch and split the output on it.... so you feed as many pedals with tap tempo input from the same tap pedal as you need to.

Otherwise, if you are specifically talking about Tremolo.... the Cusack Tap-A-Whirl has a tap in/out. You could run a cable from the Cusack to the Eventide, and use the Cusack to tap the tempo of both pedals simultaneously.

[crxshdxmmy]

Originally Posted by Tibbonds

the Cusack Tap-A-Whirl has a tap in/out.

Didn't know that. Very cool!

[Tibbonds]

Yeah all the Cusack Tap-A-Whatever series do. Or at least the newest versions do. Uses a silly RCA connection though, so you'd have to solder your own cable up.

[tdk8709]

It's relatively easy to add a 1/4" jack to the TAW yourself.