Chuckracer

Well, to do it right you would only need to drill press the existing holes slightly larger and dowel them, then drill the new holes...

My predictable tip would be to leave it alone.

Check to make sure the output jack isn't wired backwards.

Yowser

C'mon now...

:cry:

Pig Hog! I've got one of those! Big, fat cable.

I had one for a few days. Seconds after turning it on I knew it wasn't for me. Sounded small and buzzy, even with the gains down, the...

Try some... you tell us what you like/didn't like and why!

And again.

I've got two of those white ended Lifelines cables with Switchcraft jacks I bought in the early '90's that still work great. I also have...

Hi

Wilkinson, Callaham, Gotoh/Kluson, Fender ...

You could also try a fine round file and a flashlight. If there's a sharp edge it should be removed.

When you pull the string thru the tail piece do you see an of the windings exposed? I thread my strings thru the ball from the old...