LPV's latest activity

  • L
    Silicon diode... they will work but don't expect the sound to be too different from the 1N4001 or other Si diodes. Gets extra points for...
  • L
    I’ve got a few of these rectifier diodes I scavenged and I’m thinking about making a pedal with them. Are they any good from a tone...
  • L
    LPV reacted to Kojack19's post in the thread Can someone explain re-amping with Like Like.
    Some of this depends on how much volume you are looking to strip away. Attenuators are great for knocking off a few DBs but if you are...
  • L
    LPV replied to the thread Built a 212.
    Thanks!
  • L
    LPV replied to the thread Built a 212.
    5/8” Baltic Birch ply except back which is 1/2”, box jointed.
  • L
    LPV replied to the thread Built a 212.
    Sounds really great. In case anyone is wondering It’s wired to 4ohm because the mosvalve sounds great at 4 ohm. I’m going to install a...
    • F89F2251-5DF8-4820-98A4-59B0A8D776FF.jpeg
  • L
    LPV replied to the thread Built a 212.
    added a Traynor logo to the front. Looked a little naked. Fills the amp gap.
    • C234BC8E-FC14-41A5-919E-80F847332E4A.jpeg
  • L
    LPV replied to the thread Built a 212.
    30” tall 23” wide 14” deep
  • L
    LPV replied to the thread Built a 212.
    Ya closed oversized. Size is similar to a wizard 212. Wanted some bottom end. I run an IR into FOH so it’s really only stage volume.
  • L
    LPV posted the thread Built a 212 in Amps and Cabs.
    Wanted a 212 for an EVH style rig I’m going to be using if and when the band starts playing live again :dunno: It will have the 2 weber...
    • A62B725D-9C72-4876-9610-0971CD8D4236.jpeg
Top