twangbanger

Tonex plus your Boss is a pretty solid combo…I added a Tonex pedal with my GTX100 Fender and now I find no need for upgrade because of...

The bone saddle had already been lowered as much as it can, I spoke with Rick at Rosecreek Guitar and he likes to get the saddle at the...

I had a '25 Martin with bar frets, and a local luthier, who had been a metalworker, said that he could get them made to the exact size...

While 0.011 relief is pretty high for me, plenty of folks would actually set relief at a similar value. With that in mind, I am not sure...

Compression fretting is basically just refretting with something similar to bar frets. I have been told this has been Martin's standard...

Thank you for the replies. I went ahead and bought the guitar and it wasn't nearly as bad as he described over the phone. the intonation...

I would take it to the Music Gallery in Highland Park or Hogeye Music in Evanston.

Martins from the 70s to the mid-80s had various issues, including the tube neck reinforcement and being overbraced, which included the...

A badly cupped neck, if that is what you are worried about, is generally remedied these days by going with compression fretting. Not a...

You will absolutely want to make sure you get a good luthier to look at it., good call there. Forward bow in the neck would mean it...

lI got a opportunity to buy a older Martin for a good price, it however has a forward bow to the neck the guy says. I've not got a...

So I've been hashing this out for a little while… I finally talked to Steve Carr himself, and only with his expertise on the amps...

This is the home video cell phone vid I did of my "Vinny, the Little HiWatt". I still hear it now and think to myself that I don't dig...

I have owned a Vincent 2x12 for a few years, and I've only really played the Impala a couple times, so keep that in mind. That said, the...