The SR is 2 ohms. You could put the chassis in a new cab with 2 - 4 ohms speakers in parallel which would give you 2 ohms and no new transformer...
I played a new CVR, DRRI, TRRI, and SRRI side by side for about two hours in a store. The CVR was my least favourite because it was noisy and...
Correct and it's blinged out sibling, the 356.
I wrap my stand's yellow surgical rubber parts in that green painters masking tape where I hang my Gibson LP. I can't be bothered to do the...
I'm not picking a fight but - who gives a rip what the unplugged tone is?
All good points. Spend the money and get the mods done. If it doesn't sound right, sell the guitar. Maybe a Schecter is really your sound?
Laskin is one the best in contemporary guitar inlay.
$59? how good a piece of kit could it be for $59? The ad says it's "die-cast" construction. IE: zinc with chrome plating. This is barely...
By Vibrolux do you mean the Custom Vibrolux Reverb? One neg is that it has no negative feedback so it hisses like a bucket of snakes when idling....
Unfortunately, even changing 1 pot or cap on an ES 335 means you have to pull all of the pots out and pull them all back with strings, no? Even...
+1 - Any quality compressor set for subtle compression will give that "tube" warmth and feel to a sterile amp. I have a CS3 with the Monte Allums...
I think Ben Harper is the best "rock" performer (for want of a better description) currently out there and active. The Best. I can't think of...
But if the Vent stayed $500 and they dropped the Lex to $250 - Lex. If I was going to cough up $300, I'd go the extra $200 for the vent.
Yes you can file the saddles down. They're usually brass and are very soft. Start with adjusting the depth of the string notch before you go whole...
The Plek is like all other production machines - it allows a semi skilled technician to do the work of a skilled craftsman. Anyone who has leveled...
Would I go from a ceramic disc to a $3 Sprague Orange Drop? Yes. Would I drop $10-20-50 on some vintage bumble bee or other cap? That's kooky.
Or if you're Charlie Sheen
Now, if you want a really big sound, try a John Holmes.
Tab and Young Bob - there's a dream team.
Les was a very good guitar player.
He was looping when Fripp was in diapers.
with Mary Ford
I bought it and dig it.
I have a Seth Lover in the neck of my LP Traditional. Tres bon.
Unless the poly is super fresh, nitro will stick as long as you sand off the gloss to give the nitro some bite. Or you can sand the poly gloss...