My experience has been the exact opposite as well
$400 if it’s beat up. Pass if there is enough fret wear to affect playability.
Probably just the setup
PAF Pro and Breed
Because Leo was born with a sixth toe on his right foot.
An entombed eyelash. Oh, the horror...
But it’s Fujigen
If it’s from the Fujigen factory, then the parts should be Gotoh. That would mean they are interchangeable and will work on a Gibson Les Paul,...
Once you get over the whole American versus Mexican thing, the decision should come very easily for you
You don’t have to take the neck off
I guess we weren’t able to get to the bottom of this one…
I can't quite make out the logo, but it's got a Strat head:
My experience has always been that closer to 9 pounds is better than closer to 8 pounds
Ibanez Talman Prestige, EBMM Cutlass, Suhr Classic
An SG is not the same scale as a Les Paul?
I wouldn’t change a single thing, and would leave that guitar exactly how it is because how it is, is killer. Your inlays look WAY better than the...
Build another guitar so as to not screw this one up, please.
File a dispute with your credit card company, and get documentation from a local repair guy regarding the guitar’s issues. Over with and done.
Charvel Pro Mod HT has served me well, and you can keep an extra $1500 or so in your pocket if you’re buying used.
The early Jems had the Jem profile neck. The VDY pictured here has the wizard profile (as do the VSK and PBK). I couldn’t imagine shaving one of...
The size and placement of the logo are WAY off. On that alone it screams counterfeit. Any pictures of the bridge, rest of guitar, etc?
A very small sampling:
If this doesn’t take care of things, the frets can easily be dressed to compensate for the difference. A full on plane and refret should not be...