Some of the Teensy variants are more powerful and have more memory than Arduinos. I accidentally discovered the MK6 was Teensy based while I was...
I’m fairly certain the MC6 is Teensy based.
I’m not usually an early adopter or a pre-orderer but I’ve also ordered one.
The MC8 is now up on their web site and available for preorder and the manual is online.
One thing to keep in mind is that Boss usually requires normally closed momentary switches. I made my own Boss compatible switch and I’m pretty...
The MIDI track options (start/stop/undo) don't work the same way as the external button 'select target track' function does. That function is what...
I finally had a few hours to dedicate to playing with this looper. I really like it and would say that most of the problems I have are because I’m...
I wish Boss would have added the ability to switch Sync Mode off and on via MIDI and/or an external switch. I hate the long press to change sync...
I think I had to set the cc messages to send a data value of 127. I believe the MC6 defaults to sending a ‘0’. For example I used cc #14 value 127...
I have my RC-10r set to MIDI channel 5 and my GT-1000 set to MIDI channel 1. MC6 PC messages are sent to either of those two channels depending on...
MC6 MKII —> RC10-R —> GT-1000 Tempo settings and tap function on MC6 are seen (synced) on both the RC10-R and the GT-1000. PC messages from MC6...
I don't have any suggestions, but I will say the Morningstar MC6 MKII seems to be working. MIDI clock, PC, and CC messages seem to work with the...
If my new 2018 LP Tribute was Pleked when it was made, I’d say it’s adequate. I did a better job myself on my last guitar, but then I’m not sure...
Absolutely yes. If you think there might be some kind of mud or tone suck use a multimeter to compare the capacitance and resistance to a straight...
Thanks for the reply. After my original post I actually swapped a PCB from a standard into my tribute. You are absolutely correct about needing...
Thank you. I think my problem with the hold to clear not working is there seems to be a difference in the MC6 MKI and MKII. The MKII doesn't have...
I had an Aviator head but didn’t love the tri tone control knob but loved channel 2. I regret selling it somewhat but I bought a different amp and...
I spoke too soon, now I have Record/Dub and Stop working but can't figure out Clear. I have the MC6 MKII as follows: Switch A Toggle On Press...
That was it. Whats funny is I just logged into TGP to say I figured it out this morning and read your post. :) You nailed it. Yes it would. I...
4b454e, would you mind you verifying those settings? When I try to use them (I have an MC6 MKII) the GT-1000 says 'recoding' followed in a couple...
Brilliant! Thanks the workaround. Native MIDI for the looper is still on my wishlist though. There’s a dedicated firmware wishlist thread on...
My top priority want is to be able to control the looper with an external MIDI pedal.
Check out Jeff Raines from Galactic. Seems to work for him. ;)
Will a Gibson Les Paul Studio PCB retro fit into a 2018 Les Paul Tribute? I’d like to be able to split coils. I know that I can just replace the...
I think it’s just supposed to be transparent and doesn’t add extra preamp coloring to to input sound.
