That's what I did (my tech anyway..)
The TDPRI thread is titled "amp nameplate source" under the Shock Brothers forum. quote form that thread: "Just thought I'd pass this along. I...
I think the boss DD-3 or DD-5 is a starting point, thanks
It was a nice one...an Echo Jr. from Pharoah Amps... Loved it at home, but I became too dependent on that mid boost when playing live and didn't...
I use a Gretsch with single coils, and a Guild hollow-body with single coils straight into a Tweed Bandmaster 5E7 clone that I built....(love that...
+1 on this !
Nice job. Most people don't understand that inductance is the best measure on how a pickup might sound. How did you measure it?
I used it live last night and I was really happy with it.
Right, if I can get like 90% of the way there, I would rather do the pedal than the tank, less expensive, less stage room required, less to...
I dunno, I had no problems up beyond the 12th fret last night, but thanks for the reply!
I'm really anxious to try the Boss FRV-1 as I am looking for a less expensive Fender Reverb tank option. I have tried several other reverbs and...
Hey all, I just wanted to post my experience with the EHX Hum Debugger.....bottom line it works. I am a single coil lover and I decided I was...
Hey all, So I have this inexpensive import archtop set-neck guitar that I would like to hone my skills on. For me the neck is too thin. I...
Hey Mike, The filter caps are about 10 years old and seem to be fine for now. No ripple noises or flabby output. Thanks!
Well, 4 months had passed and I just couldn't take it anymore, I got it fixed with a 30 cent 100K resistor. I had replaced what looked like fried...
The Silver / Blue combo isn't just for AC30s or other EL 84 amps. I tried 3 other speaker combinations for a Blackface Bassman and settled on...
Oh sorry, about that, they are available in 10's too and that's what I was using with my '67 Bassman head until I cut a new baffle. Now I have a...
Weber 12" Alnico Blue with a Weber 12" Ceramic Silver. PLEASE try those..you wont be sorry especially after break in.
To the above poster, just a few hours makes a big difference. To the OP, you should her some hum, but don't push them too hard. Just look for the...
+1000
OK Mike, Both resistors on 4 and 6 are 464 ohms. The resistors to ground off pin 8 of each socket read "OL" on my meter at its max setting of...
Left is at 1.5 Right is at 1.444 I just off the phone with my friend who is an amp tech. We are going to swap those and go from there. He said...
I am assuming these are fried? What would cause this? Also, as a precaution, do I need to replace the filter caps?
Well, I left my amp on all night on accident Thursday night. I woke up the next day and shut it down and went about my business. That evening I...
IMHO, those guys over at the TQR get just a little too giddy and hype up whatever they feel like writing about.
