Separate names with a comma.
4 knob Red Snapper into a Hiwatt
That was fast
Build an airbrake.Instructions are on several sites.Its cheap and pretty easy to build.
Buy the Hiwatt,save up and get the Metro then loadbox/line out the plexi into the Hiwatt.
'74 Hiwatt Dr103
Yes.Never could figure out what caused it so i built a line out box and hooked it up to the speaker out of the amp.Never had a problem after i...
yes.In front of a Hiwatt with the mids and highs boosted and volume all the way up
Ultimate Attenuator/Ho's unit will do this very well
You might build your own
The Super Bowl he played recently had some of his best playing Ive seen/heard.
If you are having problems selling your HO theese people may be able to help
I run a plexi type into a dummy load mounted inside the head cabinet.Then line out from what looks like the speaker out on the back of the amp to...
Pick Of Destiny
Modded OD-3 and it may be gone soon if I can decide wich amp I am going to stick with
Works OK pushing a plexi or Hiwatt type amp,any other use it needs an EQ in front and sometimes after as well
With the amps Ive used them with always had problems cutting through a mix with them.Found a mix of speakers that works well with my current...
Matchless Hot Box it is the front end of an 800
If you can find one of the 50watt 2x12 Hiwatt combos from the late 70's they are hard to beat.
There was a 100 watt 1x12 combo around that time...
Change things one at a time listen/play-on to the next part-repeat until all parts sorted out.
Sozo is making some new caps that sound similar to...
Doesnt a Muff Diver need a Big Muff?
Eddie Van Halen Phase 90,PAF sales,the amp modders made a killin from information given in his interviews.
3 Monkeys orangutang
Looks simple enough to build
Teflon is the best for me I like to use a higher temp iron and the teflon doesnt seem to melt all over the place like the pvc does.Cloth is fine...