Search results

  1. thelionsden

    What is the BEST attenuator?

    Not all reamping attenuators allow you to increase the output of your amp. There are more reasons for the reamp idea then just to make something louder. I think the reamping allows the amplification circuit to match up better with the speaker than just presenting a lowered voltage from the host...
  2. thelionsden

    Sold Bogner Cube 1x12 w/ Vintage 30

    These are great cabs! I have been using one as my go to for years, they sound huge! I prefer the Classic Lead 80 over the V30 with my Marshall. G12H30 sounds great in it as well. Used to use one of those with a Two Rock Custom #44 (that I should never have sold!) and it sounded terrific.
  3. thelionsden

    Fryette Introduces the Power Station

    True. I just didn't want people to be afraid to try the PS or be discouraged and give up if the squeal was there even tho using all isolated PSU
  4. thelionsden

    Fryette Introduces the Power Station

    As I mentioned in my post about resolving my squeal... I was not using a common power supply, each Eventide pedal has its own wall wart supply and the rest of my pedals use Voodoo lab. Nevertheless I had the squeal as there was two paths to ground created with my switch. Isolated power...
  5. thelionsden

    Fryette Introduces the Power Station

    Thanks! Yes, it was very satisfying to solve that!
  6. thelionsden

    Fryette Introduces the Power Station

    FYI I had a high frequency oscillation/feedback loop when using the power station with a certain Marshall. At first I thought it might be the amp, because I didn't hear it with another amp i tried. But this amp (71 Marshall) just has a high frequency response and that revealed the problem. I...
  7. thelionsden

    Marshall 6100 30th Anniversary EL-34 Version

    Hi Steve... I don't have the brass one but I have a nice black combo in great shape with the midi board flaw corrected, footswitch, new tubes and bias and the 1x12 extension cab. I only use it to work on tunes in front of my computer, but I would play the gig with it any time, it is very...
  8. thelionsden

    Marshall 6100 30th Anniversary EL-34 Version

    Don't know where you are located but my friend in Cleveland is an electronics tech that knows the flaw in the midi board and knows how to upgrade it. He dialed mine in. I have the combo with the footswitch.
  9. thelionsden

    guys, tell about the Fryette power station and the Bad cat unleash

    Fryette sells a rack mount kit for the Power Station. Very well made and sturdy, it adds a faceplate with angled braces. A small plastic SKB rack case and it is perfect. http://www.fryette.com/power-station-basic-rack-mount-kit/
  10. thelionsden

    Fryette Power Station Question (using as a load box)

    Have a look at this post: https://www.thegearpage.net/board/index.php?threads/fryette-power-station-direct-to-foh.1650376/#post-21108141
  11. thelionsden

    Fryette Power Station: anyone use one in parallel with a speaker cab?

    I am not really clear on what you are trying to achieve? Clean tone with no effects(or effects into the front) and then switchable to overdrive tone with one OD amp dry and one OD amp with effected tone mix playing at the same time?
  12. thelionsden

    Fryette Power Station: anyone use one in parallel with a speaker cab?

    I am not exactly saying that. The Jim Kelley has to be rated for the amp that is going into it. That is the more important consideration, as you don't want to run your amp at the wrong impedance. As to whether or not it is ok to put a different impedance cab on the output of the Kelley, that...
  13. thelionsden

    Fryette Power Station: anyone use one in parallel with a speaker cab?

    Think of the load devices/attenuators the same as speakers. work out the impedances the same way to know if something is ok or not. I don't know the impedance rating of the Jim Kelley and what is the recommended impedance of the speakers you can attach to it. Its best to have both...
  14. thelionsden

    Fryette Power Station: anyone use one in parallel with a speaker cab?

    If you use 2 cabs, or 2 speakers , half the power goes to one cab/speaker and half to the other. It is not less loud because the other speakers are producing sound pressure. The PS is like adding another cab/load so it absorbs half of the power that the amp produces. Halving the power reduces...
  15. thelionsden

    Fryette Power Station: anyone use one in parallel with a speaker cab?

    Yes you can do that to run a wet/dry with an attenuated dry. Seems a shame not to use the PS for the attenuation tho as it is so good. Seems it would be better to use another amp/cab of some sort to run your wet if you had one. Maybe PS line out into return of an amp with a loop for the wet...
  16. thelionsden

    Fryette Power Station - Direct to FOH

    Well the Power Stations main feature is attenuating a tube amp and extracting that tone to be used in various ways. If you wanted to use an amp for your tone while keeping the amp offstage, it would make more sense than putting it in the chain after a device that can do everything including cab...
  17. thelionsden

    Fryette Power Station - Direct to FOH

    My Power Station Manual says: "!A SPEAKER MUST ALWAYS BE PLUGGED INTO ONE OF THESE JACKS WHEN THE AMP IS ON OR DAMAGE MAY OCCUR." The 6L6 power amp in there needs a load too, just like any other tube amp. Edit to add: the manual is a little bit vague. It says that if there is no speaker...
  18. thelionsden

    Fryette Power Station - Direct to FOH

    If you are not going to use the power station to power a speaker, why use it at all? Plug tech 21 into direct box into FOH. If you want to use the Fryette, I am sure it needs a load hooked up to it. I am not sure if the Fryette volume control controls level of line out, but it probably does...
  19. thelionsden

    Last pedal i will ever buy - Caveman love

    ordered mine on Feb 26..shipped today
  20. thelionsden

    Delay with tap tempo and expression pedal feedback control

    Timefactor definitely. Very easy. Expression pedal can control many/multiple parameters and can be different ones on each preset
  21. thelionsden

    Last pedal i will ever buy - Caveman love

    How do you have them set for each pickup type?
  22. thelionsden

    Recommend a MARSHALL???......

    ...like this one here: https://www.thegearpage.net/board/index.php?threads/1387956 seems to be a very reasonable price too..
Top Bottom