I just bought this from Saturnworks this week but my needs quickly changed; there's nothing wrong with it so I don't want to return it to them. Will pass along to a TGPer for $10 or so off new. This has the large rubber MXR knob cover as shown.
This thing is tiny, 2 1/4" square with jacks on...
This was pulled from a local CL find which I brought back to S/S/S. Tested first, everything works.
I determined the single coils to be original to the guitar - a late '00s Classic 60s. They are vintage staggered, low output - sound great. 5.8-6 kohm DC resistance.
The humbucker is an F-spaced...
Pretty uncommon thing I reckon, these were sold as a set with a limited run of Pathfinder 15R heads many years ago.
Celesiton-made Vox "Bulldog" speakers.
I ran the back panel on this one through the table saw and cleanly converted it to an open-back.
I also replaced the flimsy input jack...
As the title says, this nice 3-ply mint guard was pulled from a classic series 60s strat from 2007-08. The original signed-bottom bridge pickup and 5-way switch is included. The leads are just long enough to reach back of volume pot and switch. 11-hole 60s pattern (screw hole between neck and...
Just picked this up to try out, great pedal but I won't use the dual function enough to replace my regular old AC which has been on the board for a decade!
Excellent shape, couple chips, No feet, no velcro but a bit of residue of some from the past...
Sorry for the glare in the photos.
These have been Beyer-ly used and sitting in a box in the parts pantry for quite some time. Tested, clean, and work great.
They're at least $150 new everywhere - https://reverb.com/marketplace?query=beyerdynamic%20250%2080
Model DT-250 / 80 ohm system
$38 gets 'em shipped to you.
(4) cables in total:
All 6 feet in length
(2) TRS to XLR Male
(2) TRS to XLR Female
Also throwing in some random XLR to 1/4" couplers and an insert cable with female plugs (breakout cable?). (Edit - I also just found a normal insert cable - male ends - that I will throw in as well).
My favorite singles at a great price.
Bought here recently for a project that didn't pan out.
(1) at 11"
(1) at 10"
(1) at 6" (fine for bridge use)
The black/white are terminated and taped like usual for VV singles. The lengths above are for the red/green conductors.
1/21 - I have (1) left at the $335 shipped price! Lead time for finishing is 2 weeks on this one. Thanks so much to everyone that supported this sale.
I have completed a run of (15) shells that can either end up as 1x12 or 2x10 cabinets, your choice.
I am including USA shipping...
Get your compact wet/dry/wet amp right here! Or simply some nice power for your monitors.
Excellent condition, works perfectly. A prior owner hardwired some 1/4" jacks to the barrier strips, very handy! Also looks like he put some silicone around the input jacks, maybe they had a tendency to...
Grabbed this here recently to try after hearing so much over the years, didn't disappoint! But I really don't need another TS-type. Love the flexibility of the tone controls.
Excellent, barely used condition with box and literature.
$30 shipped, thanks for looking!
Quite a spectacular tele, but the old hands and mind simply prefer a strat.
Old listing I linked to below says Sherwood; the control cavity says Sage, and it's definitely distinct from the former.
Minimal fret wear, and one of the best playing guitars of any type I've ever owned. Just...
Get half off a brand new one, shipping included, still in factory packaging.
Only picked this up to make a mounting hole template. Never mounted or hooked up.
8 ohm, 150w
$50 shipped, no trades, thanks for looking!
Perfect condition with mounting screws/springs, full leads. I'm including the EMG wiring hardness and jack (already soldered jack connections, all you have to do is the pickup connections).
The original alnico magnet version everyone loves.
Pickup sounds awesome.
BUT - the volume pot is...
I've got several cabinets hanging around in various stages of completion; you'd get your choice of grill (and one that hasn't been covered yet, so you'd have options there). Of course, all hardware will be installed.
They have been used to test speakers and have some 'shop wear', etc. I'm going...
I built a couple of these when I was doing pine and other solid wood cabinets; I do all birch ply these days so this would be the last chance to snag one of my cabinets in pine.
I picked through all my pine for weight and clarity for this build, even with the baltic birch back/baffle it weighs...
The last of my prototypes. I'm selling it for a lot less than I would for a new cabinet (which I won't be making for a while, as I'm dealing with a back injury).
I built this when I was messing with different finishes and it kind of became the 'shop cab'. I finally got around to getting it some...
Free Shipping for the Holidays...
Pine cabs are gone, but I still have one birch ply / oval back 1x12.
Black or Fawn tolex - your choice. Cane grill.
- 5/8", 11-ply Russian birch plywood
- Dado corner joints
- 1/2" Russian birch floating baffle,
- Front loading, hardware installed
I special ordered these a few weeks ago and ended up going with something else for the project. Not a knock on these at all; they're my favorite neck/bridge combo from Dimarzio.
The boxes have not even been opened.
Air Norton - Black
Breed Bridge - Black - F-Spaced