I just picked up an HX effects. I updated to the newest version firmware and everything seemed to be working fine.
I have noticed that one of the footswitches is not consistently working (will sometimes not turn on or off when pushed).
This happens quite frequently with this one...
Well I suppose the answers could change, depending on where the discussion went...my gear, taste in music, etc.
I don’t find it terribly helpful for people to bother posting “why didn’t you just do a search?” Kind of a waste of your time and mine.
Budget would be $200-500.
Hi. I currently have Gibson 490t and 490r pickups in my 2019 SG.
So far, I have installed an RS Guitarworks wiring harness, which seemed to help the sound...but I still find the neck to be a bit muddy and the bridge kind of shrill.
It’s useable, but when I compare the SG to my McCarty with...
I picked up a 2019 SG standard. Pretty nice player, but the neck pickup is too dark. Needs more clarity.
When adjusting EQ on my amp, I can almost get the neck pickup to sound right, but then the bridge is too bright.
I have lowered pickup height and roll off the bridge tone knob to...
I finally got around to adding a .0022uF capacitor to the fifth knob. It works pretty well. Filters out a lot of bass on the neck pickup.
I do have some .0033uF capacitors laying around.
I was wondering what the effect would be? A more pronounced bass roll-off, or less?
Yes I know I could...
I have a recent model 620. Bridge pickup sounds ok, but the neck sounds bad. Way too muddy.
I’ve seen replacement pickups by Barden and Lollar that look interesting.
I was thinking of either toasters or something similar like Lollar Broilers. But I don’t want the bridge pickup to sound too...
I got an EWS Fuzzy Drive from Texas Guitar Ranch for about half of what every other place charges. Looks legit, though it didn’t come with EWS manual/paperwork. How are these guys selling them for so cheap? Open box items/returns?
It’s weird. I tried it before the drives and it picked up the guitar signal much faster and consistently.
Running it after the drives significantly alters the tuner’s ability to sense the signal and work properly...even when all the pedals are disengaged.
I guess I’ll just put the tuner at...
I'm having an issue with my tuner that I haven't noticed before. For some reason, when I place my tuner in line after my other pedals, it will barely pick up enough signal to properly allow me to tune. I would think that because I have a Boss OD-3 and Blues Driver early in the chain...
I recently got a blues junior IV and compared it with my K100. The Katana sounded better. It especially took od pedals much better than the BJ.
The BJ sounded fizzy and crappy with a Blues Driver and an OD3. But the pedals sounded crunchy and smooth with the Katana.
I didn’t expect the...