2 heads 1 cab

Discussion in 'Amps and Cabs' started by ray.-s, Feb 12, 2012.

  1. ray.-s

    ray.-s Member

    Messages:
    7
    Joined:
    Feb 1, 2012
    hi guys.
    I have a marshall TSL 100 and a mesa roadster head,
    both are 100 watt.

    And a marshall 1960b.

    it it possible to run 2 head into the cab by running stereo mode on my cab?

    Thx!
     
  2. GCDEF

    GCDEF Supporting Member

    Messages:
    26,125
    Joined:
    Jun 17, 2005
    Location:
    Florida
  3. ray.-s

    ray.-s Member

    Messages:
    7
    Joined:
    Feb 1, 2012
    thank u.
    so i will not cause any damage to either heads and cab right?
     
  4. 64 burst

    64 burst Member

    Messages:
    121
    Joined:
    Jan 26, 2012
    You can definitely do it with the radial headbone. look it up.
     
  5. cestjoel

    cestjoel Member

    Messages:
    78
    Joined:
    Jun 9, 2011
    Location:
    Pomona, CA
    +1

    I would go this route so you could use all 4 speakers with each amp.Although, the left/right set up is cheaper.
    What speakers are in it, 75's?
     
  6. solitaire

    solitaire Senior Member

    Messages:
    3,721
    Joined:
    Jan 31, 2006
    Location:
    In the heartland of Sweden
    Matched impedance, per usual with hooking up amps to cabs. Oh, and seeing to that the power capacity of the speakers is sufficient to the amps.
     
  7. GCDEF

    GCDEF Supporting Member

    Messages:
    26,125
    Joined:
    Jun 17, 2005
    Location:
    Florida
    As long as you run it in stereo with one amp on each side and the impedance is correct, you'll be fine.
     

Share This Page