2 humbuckers, 3 pots, 2 switches

gorilla_city

Member
Messages
8
I'm finishing up a guitar build using a body which came routed for 2 humbuckers and drilled for 3 knobs and 2 switches. I'm having a hell of a time deciding how to wire it up, and have been toying with the following scenarios:

1)
pot 1: neck vol
pot 2: bridge vol
pot 3: master tone
switch 1: 3 way toggle
switch 2: coil split both

2)
pot 1: neck vol
pot 2: bridge vol
pot 3: concentric neck/bridge tone
switch 1: coil split neck
switch 2: coil split bridge

3)
pot 1: master volume
pot 2: neck vol
pot 3: bridge vol
switch 1: 3 way toggle
switch 2: coil split both

4)
pot 1: master volume - pull to coil split both
pot 2: concentric neck bass/treble
pot 3: concentric bridge bass/treble
switch 1: 3 way toggle
switch 2: neck/bridge tone bypass

What is your favorite wiring for 2 humbuckers, 3 pots, and 2 switches?
 

EADGBE

Senior Member
Messages
12,338
Two volumes
One master tone
Three way toggle
Blaster switch/pots bypass for the bridge humbucker.
 

wilblee

Hack sans shame
Platinum Supporting Member
Messages
5,063
Whatever you listed in number one is probably what you most want

Now that I read them, number one is how I would go as well.
 




Trending Topics

Top