Apple Garage Band Question

Discussion in 'Recording/Live Sound' started by b3l5tele, Jan 29, 2005.


  1. b3l5tele

    b3l5tele Supporting Member

    Messages:
    725
    Joined:
    Jan 6, 2002
    Does anyone know how or is able to direct me to instructions on how to record a guitar on Garage Band when using an M Box as the interface into the computer. Thanks.
     
  2. Unburst

    Unburst Member

    Messages:
    4,221
    Joined:
    Jan 19, 2004
    Location:
    Portland, OR
    If you go o the Audio/Midi setup app. and select the M Box as the default in/out device, GarageBand should receive audio from it.
     
  3. b3l5tele

    b3l5tele Supporting Member

    Messages:
    725
    Joined:
    Jan 6, 2002
    Martin,
    Thanks for the tip. But, when I click the audio input and output selection no M Box selection appears. Any other suggestions are much appreciated.
     
  4. mike@switchback

    mike@switchback Member

    Messages:
    1,991
    Joined:
    Jan 22, 2003
    Location:
    PA
    You also have to download the Core Audio driver from the digidesign website and install it. Then do what Unburst said.
     
  5. b3l5tele

    b3l5tele Supporting Member

    Messages:
    725
    Joined:
    Jan 6, 2002
    Thanks, it worked. The problem now is playback is garbled, it sounds like digital noise. ??? Again, any suggestions are most welcome.
     
  6. onemind

    onemind Member

    Messages:
    3,588
    Joined:
    Oct 28, 2004
    Location:
    Oceanside, NY
    Check bit rate, make sure the M-Box is chosen for playback as well. The DUC (digidesign Users Conference) at Digidesigns websites has tons of good information on this as well.

    Steve
     
  7. b3l5tele

    b3l5tele Supporting Member

    Messages:
    725
    Joined:
    Jan 6, 2002
    Got it working, thanks for the help!
     

Share This Page