Audio Interface for Jamkazam

Discussion in 'Digital & Modeling Gear' started by naccoachbob, Apr 9, 2015.

  1. naccoachbob

    naccoachbob Member

    Messages:
    95
    Joined:
    Feb 18, 2011
    Location:
    Nacogdoches, Tx
    I'm using a Line 6 Pod Studio UX2 for my a/i, and trying to get onto sessions in jamkazam. Trouble is, the max time I've been able to stay on has been about 8 minutes.
    After troubleshooting, the support folks thought that UDP was crashing my router. So I took the router out and ran directly to the cable modem from my pc. Still didn't go but 8 min.
    I run the Pod Farm 2.5 when the session is on because that's the only way to get audio to the session. Not sure if Pod Farm fiddles with UDP, not sure why it would, but who knows?
    The UX2 uses USB 1.1, and I'm wondering if that might be the issue.
    Does anyone reading this get on jamkazam and successfully get thru a session of 30+ minutes? If so, what audio interface do you use? What level of USB does it have?
    If I change, I'd like to be able to have 4 inputs, maybe 2 mics and 2 instruments.
    My pc is pretty robust with quick processor, lotsa ram. My internet connection is high speed, and latency indicated by jamkazam is only about 14ms-18ms.
    Really getting frustrated trying to make it work.
    Any help is much appreciated.
    Thanks,
    Bob
     

Share This Page