cab splitter

Discussion in 'Amps/Cabs Tech Corner: Amplifier, Cab & Speakers' started by PLAYLOUD, Mar 21, 2006.

  1. PLAYLOUD

    PLAYLOUD Member

    Messages:
    2,231
    Joined:
    Jan 31, 2004
    I have a 4x10 combo (8ohm) and an extension 1x12 cab also 8ohm. What do I need to split the signal so I can use both speakers?
     
  2. KBN

    KBN Member

    Messages:
    827
    Joined:
    Mar 17, 2006
    What amp is it? That would help.
     
  3. PLAYLOUD

    PLAYLOUD Member

    Messages:
    2,231
    Joined:
    Jan 31, 2004
    fUCHS TDS 4X10 COMBO WITH A 1X12 EXTENSION
     
  4. KBN

    KBN Member

    Messages:
    827
    Joined:
    Mar 17, 2006
    Couldn't you just run the two cabs parallel on the 4 ohm output of the TDS?
     
  5. PLAYLOUD

    PLAYLOUD Member

    Messages:
    2,231
    Joined:
    Jan 31, 2004
    I'm a little embarrassed to say, I don't know. Would I plug into the 4 ohm with a Y cable? With one going to the cab and the other to the combo?
     

Share This Page