Sold Custom Evil Robot Phil X Signature 1 of 9

AD

Platinum Supporting Member
Messages
3,756
This is the made in Korea version, however, it is 1 of 9 that made it back to the Kasha Custom shop in the US for tweeks and fortification (see plaque on the rear of amp). Amp is in excellent condition and sounds amazing.
It was taken to a tech and gone over just a few months ago. Over $425US in NOS tubes were installed at that time.

Specs
Power: 18W/30W Class A, cathode biased
switching: Power On, 18W, Standby and 30W Operation
2 channels: Loudness A/B high and low
Controls: Loudness A/B Volume, Tone A/B (pulling Loudness A switches between channels A and B)
Master Volume
Vibrato: Intensity and Speed
Power Tubes (4) 6V6 (fixed bias)
Preamp Tubes: (3) 12AX7, (1) 12AU7, (1) 6AV6
Speaker Output: 8/16 ohm selector, output jack wired to speaker,
disengages external speaker when inserted
Remote Speaker Output
Effects Loop Tube buffered, Send and Return (true bi-pass when not inserted)
Tone Selector: Normal, Mellow, and Bright
Custom tuned Evil Robot speaker (8 ohm) 12”
Two button foot switch, controls channels and vibrato
28 lbs
Cooling Fan
20”L x 9.5”W x 15”H

Price: $650 shipped

No duties or taxes for US and Canadian residents.

View media item 48203View media item 48204View media item 48205View media item 48206View media item 48207View media item 48208
 
Last edited:

seaninsjca

Member
Messages
13
"1 of 9 that made it back to the Kasha Custom shop in the US for tweeks and fortification"

What does this mean?
 

AD

Platinum Supporting Member
Messages
3,756
"1 of 9 that made it back to the Kasha Custom shop in the US for tweeks and fortification"

What does this mean?
From the Kasha website:

Mod 10 – Evil Robot mod for C30 model. This mod converts the Chinese model into the American with a few extra goodies. New 5W limiter for rich crunchy cords, Power attenuator that goes cold or hot specifically designed for class A amps. Weber custom kick ass speaker and changes to the Vibrato for a rich smoother tone and yes, it will work with the EFX loop on. In addition, we reduce the heat build up on the front panel, which will increase the tube life. Overall, this mod is a must for anyone who has an EVR C30

1. Power attenuator cold/hot
2. Second channel cleaner, less distortion with more jangle and stacked tone POT for full channel separation
3. Heat reduction include fan, front plate and hood.
4. Speaker change
5. Output Transformer change
6. Effects loop switch on front panel and send return volume
7. 5W limiter
8. Conversion to 6L6 or EL34 with mod for safe use
9. Upgrade Vibrato fuller richer sounding and works with effects loop
 




Trending Topics

Top