DRRI Footswitch Problem

Discussion in 'Amps and Cabs' started by hippiebob, Dec 22, 2009.

  1. hippiebob

    hippiebob Member

    Messages:
    776
    Joined:
    Apr 16, 2008
    Location:
    ATL
    I noticed that now when I use my footswitch for reverb, it won't switch it on and off, but the "vibrato" switch works fine. The reverb works fine without the switch plugged in. Anyone got a clue?
     
  2. hippiebob

    hippiebob Member

    Messages:
    776
    Joined:
    Apr 16, 2008
    Location:
    ATL
  3. riffraff7

    riffraff7 Member

    Messages:
    57
    Joined:
    Feb 17, 2007
    Location:
    SoCal
    Pull the plastic off the back of the footswitch & see if one of the wires are broken. One probably is & you would need to solder it back. Good luck!
     
  4. hippiebob

    hippiebob Member

    Messages:
    776
    Joined:
    Apr 16, 2008
    Location:
    ATL
    Tried that out...looks like the inside lug of the reverb switch is shorting to ground and the vibrato switch isn't.
     

Share This Page