Dumble OD trim values?

Discussion in 'Amps/Cabs Tech Corner: Amplifier, Cab & Speakers' started by Normster, Aug 31, 2005.

  1. Normster

    Normster Member

    Messages:
    921
    Joined:
    Oct 14, 2004
    Location:
    Sacramento, CA
    Any idea what the value of these resistors are?
    [​IMG]
     
  2. scottl

    scottl Member

    Messages:
    17,041
    Joined:
    Apr 11, 2003
    Location:
    Cherry Hill, NJ
    call me.

    800-932-0037
     
  3. TWreckXS

    TWreckXS Member

    Messages:
    12
    Joined:
    Sep 2, 2005
    Location:
    KS
    Normster,

    And the answer is ....... ? Inquiring minds would like to know and not bother Scott with a phone call.
    Thanks,
    Robert
     
  4. scottl

    scottl Member

    Messages:
    17,041
    Joined:
    Apr 11, 2003
    Location:
    Cherry Hill, NJ
    Apparantly Dumble was experimenting with an alternative to the usual series resistor into OD trim. There is a thread from several months ago on Ampage where these values are discussed. Also, check the Dclone folder on Blueguitar.org There is a zip file with a 90s schematic. It has a funky network as well. 47pf across 470k into 120k into 25k trim with a 4.7k tail to ground.

    I think the picture above has a ground point in the middle. This would change the load on the CL2 cap and reduce some bass. IMO of course.

    Scott
     
  5. TWreckXS

    TWreckXS Member

    Messages:
    12
    Joined:
    Sep 2, 2005
    Location:
    KS
    Thanks for the information Scott!

    Robert
     

Share This Page