Guitarbean25
Gold Supporting Member
- Messages
- 525
I have this up on the Acoustic forum here:
Edwinson Jupiter
Up for trade or sale is Edwinson's Jupiter Cutaway guitar. It's beautiful guitar in all ways with amazing features, but I find myself gravitating toward maple based guitars. The Red Gum back and sides is very similar to Mahogany only much prettier.
For trades I'd consider, as mentioned, maple based guitars as well Dreadnaughts. Conversely, I'd consider smaller bodied guitars. And since where here on TGP, I'd consider electrics as well
Semi-hollows and archtops would really pique my interest.
Cash value would be $4000.
Original ad:
Original Edwinson Jupiter Cutaway Thread
Specs:
Woods and Materials
Back and Sides: Red Gum (Liquidambar styraciflua).
Inner sides: Quarter sawn Ipe.
Top: AAA Carpathian Spruce from Ukraine.
Body Bindings, end graft, heelcap, and bevel trim: Ziricote.
Top purfling: High-flame Pyinma with dyed red veneer lines.
Neck: American Cherry with Maple/ Padouk/ Maple center lam.
Fingerboard: Madagascar Ebony bound with Ziricote; Flamed Pyinma/ red veneer purfling.
Front head plate: Madagascar Ebony, Ziricote, Pyinma, red veneer lines.
Rear head plate: Ziricote with “Constellation” inlay in copper and MOP/shell.
Bridge: Element 3.0 style, Ziricote.
Rosette: Asym, Ebony, Ziricote, Spalted Maple, wood veneer lines.
Tuning machines: Swiss-made Schertlers, bronze gear, black with Ebony buttons
Truss rod: Luthier’s Mercantile TRSD two way adjustable, access at headstock
Nut and Saddle: Unbleached bone
Bridge pins: Ebony, Parisian Eye
Pickup: L.R. Baggs Lyric pickup system, installed
Case: Custom fitted Ameritage Gold Series, Navy with Burgundy Binding;
Burgundy crushed velvet interior, Brass hardware,
and humidity control system.
Specifications
Width, lower bout: 16 3/16” Depth, lower bout: 4 3/16”
Width, Waist: 9 1/2” Depth, Waist: 4 3/8”
Width, upper bout: 11 3/4” Depth, upper bout: 4”
Body length: 20” Total length: 41”
Scale length: 25.5”
Width at nut: 1 13/16” String spread at nut: 1 5/8”
Width at neck/ body (13th fret) 2 3/16”
String spread at bridge saddle: 2 1/4”
Fingerboard radius: 16”
Thirteen frets to body, twenty total;
EVO Gold fret wire, medium.
Neck carve: Slim, modern Medium-C.
Special Features
Element Style Florentine cutaway, fully bound
Element 3.0 style Ziricote bridge
Chamfered, three-layer Tri-port, lower bout hip
Ryan-style arm bevel
Double side construction (Ipe inner sides)
Edwinson Jupiter
Up for trade or sale is Edwinson's Jupiter Cutaway guitar. It's beautiful guitar in all ways with amazing features, but I find myself gravitating toward maple based guitars. The Red Gum back and sides is very similar to Mahogany only much prettier.
For trades I'd consider, as mentioned, maple based guitars as well Dreadnaughts. Conversely, I'd consider smaller bodied guitars. And since where here on TGP, I'd consider electrics as well
Semi-hollows and archtops would really pique my interest.Cash value would be $4000.
Original ad:
Original Edwinson Jupiter Cutaway Thread
Specs:
Woods and Materials
Back and Sides: Red Gum (Liquidambar styraciflua).
Inner sides: Quarter sawn Ipe.
Top: AAA Carpathian Spruce from Ukraine.
Body Bindings, end graft, heelcap, and bevel trim: Ziricote.
Top purfling: High-flame Pyinma with dyed red veneer lines.
Neck: American Cherry with Maple/ Padouk/ Maple center lam.
Fingerboard: Madagascar Ebony bound with Ziricote; Flamed Pyinma/ red veneer purfling.
Front head plate: Madagascar Ebony, Ziricote, Pyinma, red veneer lines.
Rear head plate: Ziricote with “Constellation” inlay in copper and MOP/shell.
Bridge: Element 3.0 style, Ziricote.
Rosette: Asym, Ebony, Ziricote, Spalted Maple, wood veneer lines.
Tuning machines: Swiss-made Schertlers, bronze gear, black with Ebony buttons
Truss rod: Luthier’s Mercantile TRSD two way adjustable, access at headstock
Nut and Saddle: Unbleached bone
Bridge pins: Ebony, Parisian Eye
Pickup: L.R. Baggs Lyric pickup system, installed
Case: Custom fitted Ameritage Gold Series, Navy with Burgundy Binding;
Burgundy crushed velvet interior, Brass hardware,
and humidity control system.
Specifications
Width, lower bout: 16 3/16” Depth, lower bout: 4 3/16”
Width, Waist: 9 1/2” Depth, Waist: 4 3/8”
Width, upper bout: 11 3/4” Depth, upper bout: 4”
Body length: 20” Total length: 41”
Scale length: 25.5”
Width at nut: 1 13/16” String spread at nut: 1 5/8”
Width at neck/ body (13th fret) 2 3/16”
String spread at bridge saddle: 2 1/4”
Fingerboard radius: 16”
Thirteen frets to body, twenty total;
EVO Gold fret wire, medium.
Neck carve: Slim, modern Medium-C.
Special Features
Element Style Florentine cutaway, fully bound
Element 3.0 style Ziricote bridge
Chamfered, three-layer Tri-port, lower bout hip
Ryan-style arm bevel
Double side construction (Ipe inner sides)
