Flashback Delay question.

Discussion in 'Effects, Pedals, Strings & Things' started by grimlyflick, Feb 12, 2015.

  1. grimlyflick

    grimlyflick Member

    Messages:
    395
    Joined:
    Feb 19, 2014
    Does anyone know of a way, if at all, that you can set a Flashback Delay's stereo outputs to one output dry and the other ouput wet/dry like a Boss delay.
    I run two amps, one with reverb and the other dry, and I'd like it so when I use the Flashback with a 50's style slap it only goes through the dry amp.

    Ideas? Or just ditch the Flashback and get a Waza DM-2?
    :beer
     
  2. Blix

    Blix Supporting Member

    Messages:
    19,764
    Joined:
    Mar 11, 2010
    Location:
    Stabekk, Norway
    Have you checked if you can do it with the toneprint editor program. I doubt you can, but it's worth a shot.
     
  3. grimlyflick

    grimlyflick Member

    Messages:
    395
    Joined:
    Feb 19, 2014
    Had a look but couldn't find a way in the editor.:(
     
  4. schristie

    schristie Supporting Member

    Messages:
    1,154
    Joined:
    Nov 13, 2009
    Location:
    Kansas City Area
    Run a passive splitter before the delay. One in two out would be uber easy to make.
     
  5. nater9

    nater9 Member

    Messages:
    1,054
    Joined:
    May 7, 2009
    Location:
    Dusty Desert Lands
    I thought if you use the internal switch to set to "kill dry" mode you will get 100% wet on one output and still get your dry signal from the other output? check the manual...
     
  6. grimlyflick

    grimlyflick Member

    Messages:
    395
    Joined:
    Feb 19, 2014
    Tried that, no such luck.:(
     

Share This Page